90 Series Prado Dual Battery Setup: Maximize Your Adventure
The Toyota Prado, renowned for its durability and off-road prowess, often ventures into remote areas, demanding adequate power supply for accessories. A dual battery setup is a pragmatic solution, enabling extended use of 12V accessories without draining the starter battery.
This article guides you through the process of setting up a dual battery system for the 90 Series Prado, ensuring you remain powered up during your adventures.
Understanding the Prado's Electrical System
The Prado's electrical system comprises a 12V network, with the starter battery powering the engine and initial electrical components, while the auxillary (or deep cycle) battery caters to accessories like lights, fridges, and phones.
In a dual battery setup, the auxillary battery is charged via the alternator, ensuring both batteries remain powered during driving and while the engine is off.
Choosing the Right Batteries
Selecting the correct battery is critical for a successful dual battery setup. The starter battery is typically an opaque, glass mat (AGM) or flooded lead-acid type. For the auxillary, a deep cycle, AGM or gel battery works best, offering high capacity for a longer duration.
Recommended sizes are G51 (96Ah) for the starter and G58 (110Ah) for the auxillary. Ensure both batteries are the same size and type for balanced charging.
Isolating the Batteries
Battery isolation ensures the auxillary battery doesn't drain when the engine is off. A smart battery isolator is ideal, as it redirects charge from the auxillary to the starter battery when needed, maximizing usage and preventing overcharging.
Connect the isolator to the battery posts, then connect the auxillary battery's positive terminal to the isolator's output. Ensure all connections are clean and tight to prevent power loss and corrosion.
Installing the Dual Battery Setup
Installing the dual battery system requires careful routing of cables to prevent chafe and ensure maximum efficiency. The Prado's engine bay is spacious, offering ample room for the batteries and accessories.
Mount the batteries on the driver's side, keeping them secure and away from heat sources. Route cables along the engine's firewall, using cable ties to secure them.
Mounting the Batteries
Battery trays ensure the batteries remain stable and prevent short circuits. Choose a tray that allows both batteries to sit flat and securely প make sure the tray is compatible with Prado's 90 Series.
Secure the tray using the provided Frost plugs or other suitable mounting points. Ensure there's sufficient ventilation around the batteries to dissipate heat.
Connecting the Cables
Use high-amp, tinned, stranded copper cables for connections. Thicker cables (e.g., 60-80AWG) cater to higher current demands and prevent voltage drop.
Connect the starter battery's positive terminal directly to the engine's +ve terminal. From the auxillary battery's +ve terminal, run a cable to the smart isolator's input. The isolator's output should connect to the auxillary battery's -ve terminal and a second cable, which connects to the first battery's -ve terminal.
Following these steps ensures a robust, reliable dual battery setup for your 90 Series Prado. Regularly check your connections and maintain your batteries for optimal performance, keeping you powered up wherever your adventures take you.