Can You Join 6mm Armoured Cable: Step-by-Step Guide
Ever found yourself in a situation where you need to join two segments of 6mm armoured cable, ensuring a strong and durable connection? This task might seem daunting, but with the right approach and knowledge, it can be achieved efficiently and safely.
Armoured cables, like the 6mm variant, are designed to protect the electrical conductors inside from damage and wear. They are commonly used in outdoor settings and areas with heavy machinery. Knowing how to join them correctly is a vital skill for anyone working with electrical systems.
Understanding 6mm Armoured Cable
Before we delve into how to join these cables, it's essential to understand their structure. The 6mm armoured cable, as its name suggests, has an outer layer of armor, typically made from steel or aluminum. This layer is designed to absorb any impact or tension that might otherwise damage the internal conductors.
The actual size of the cable (its cross-sectional area) is determined by the size of the copper or aluminum conductors it contains. The numerical size (6mm in this case) refers to the approximate diameter of the cable's outer circumference.
Inspection Before Joining
Before attempting to join any armoured cable, it's crucial to conduct a thorough inspection. The purpose is to ensure there's no damage to the cable's outer armor, which could compromise the strength of the joint. If the armor is compromised, it's best to replace the damaged segment.
Before starting, make sure you have all the necessary tools. This includes cable connectors or a crimping tool, electrical tape, and safety gloves. Always remember to switch off the power at the fuse box and use a voltage tester to confirm that the cable is indeed dead before starting the work.
Joining Methods
There are several methods to join armoured cables, depending on the specific type of cable and your local regulations. Two common methods are mechanical connectors and ex-armor splicing.
Mechanical connectors, also known as cable connectors or compression connectors, are a quick and simple solution. They work by crimping around the cable's armor, providing a secure connection. Ex-armor splicing involves stripping back the cable's armor and joining the exposed cores. This method is more complex but offers a stronger connection. Remember to always follow the manufacturer's guidelines when using these methods.
Steps to Join 6mm Armoured Cable
Once you've inspected your cable and chosen your joining method, it's time to start the process. The general steps to join 6mm armoured cable are:
1. Prepare the cables by cutting them to the desired length and stripping back any outer jackets.
2. For mechanical connectors, prepare the connector according to the manufacturer's instructions. This usually involves installing an inner bushing and ensuring the connector is clean and free of debris.
3. For ex-armor splicing, carefully cut and strip back the armor to expose the internal conductors. Ensure you leave enough armor on either side of the join to provide a strong anchor.
Using Mechanical Connectors
To join using a mechanical connector:
- Slide the connector over one of the cable ends.
- Insert the stripped cable end into the connector, ensuring the armor fits snugly over the bushing.
- Using a crimping tool, crimp the connector according to the manufacturer's instructions. This should involve applying pressure to the connector in a specific way to ensure a strong joint.
- Repeat the process on the second cable end.
- Secure the joint using electrical tape, wrapping it around the connector and back over the taped portion of the cable.
Ex-Armor Splicing
To join using ex-armor splicing:
- Strip back the armor on both cable ends to expose the internal conductors. Leave enough armor on either side to provide a strong anchor.
- Twist the exposed conductors together. The twist should go in the same direction as the original cable.
- Bind the twisted conductors together using electrical tape or a Teflon tape that's compatible with the cable insulation.
- Slide a heat-shrink sleeve over one of the cable ends. This sleeve should completely cover the joint once shrunk.
- Using a heat gun, carefully heat the sleeve until it shrinks tightly around the joint. Ensure the heat doesn't damage the cable insulation.
- Secure the joint using electrical tape, wrapping it around the heat-shrink sleeve and back over the taped portion of the cable.
It's crucial to remember that these steps are a general guide. Always consult with your local electrical regulations and the manufacturer's guidelines for the specific cable and connectors you're using.
Testing the Joint
After joining the cables, it's essential to test the integrity of the joint. This can be done using a megohmmeter to ensure there's no leakage of current through the joint. A visual inspection can also help identify any potential issues, such as cracked armor or exposed conductors.
Working with electrical systems can be dangerous, but with the right knowledge and caution, it can be done safely and effectively. Always prioritize safety when working with 6mm armoured cable or any electrical system.
If you're unsure about any aspect of joining 6mm armoured cable, don't hesitate to consult a professional. They can provide tailored advice and guidance based on your specific situation. Happy splicing!