Acura RDX Remote Battery Change: Simple Guide
If you're an Acura RDX owner, you might find yourself in need of changing your remote battery at some point. While the process isn't as straightforward as popping in a new battery in your TV remote, it's not rocket science either. Today, we're going to walk you through the step-by-step guide on how to change your remote battery in your Acura RDX.
Before we dive into the process, let's ensure you've got the correct battery. Acura RDX remotes use a CR2032 lithium battery. It's a 3V coin cell battery, which you can find at most electronics stores or online. Now that you've got your battery, let's proceed to changing it. But first, things first - safety first!
Preparation
Before you start, make sure your RDX is safely parked and the engine is off. Also, ensure you're working in a well-lit area. Having the right tools for the job makes everything easier. You'll need a small flathead screwdriver and perhaps a small Phillips head screwdriver, depending on your remote model.
Once you've got your tools ready and in hand, you're ready to proceed. But before we do, let's discuss the two methods you can use to change your battery, as there are slight differences depending on your RDX model year.
Method 1: For 2016-2021 RDX Models
For this method, your remote has a small square slot at the back that you'll need to use.
Use your flathead screwdriver to gently insert it into the slot and twist. This should cause the back cover to pop off. Be gentle, as you don't want to crack the cover. Once the cover is off, you'll see the battery. It's secured by a small metal clip held in place by a Phillips head screw. Remove the screw, carefully lift the clip out, and then gently pull the battery out using the indentation on the side. It should pop right out.
Method 2: For 2013-2015 RDX Models
In this case, you'll find two small circular holes on the back of your remote.
Use a small flathead screwdriver to gently pry out the two rubber plugs. Once removed, you'll see two screws. Remove those as well. After the screws are out, use a small flathead screwdriver to carefully pry off the back cover. The battery is placed in a tray and secured by a clip. Lift the clip and the battery should pop right out.
Replacing the Battery
With the back cover off and the battery out, it's time to replace the battery. Take note of the positive and negative sides - they should match the + and - symbols on the new battery. If your battery is dead and your remote doesn't work, lining it up correctly shouldn't be too hard.
Gently press the new battery into place, making sure it aligns correctly with the connectors. Once it's in place, pop the back cover back on and secure it. For the 2016-2021 models, just press it back on until it clicks. For the 2013-2015 models, replace the screws and the rubber plugs to secure the back cover.
Congratulations! You've successfully changed the battery in your Acura RDX's remote. It's always a satisfying feeling to DIY a repair or maintenance task, isn't it? So, the next time your remote starts acting up or the battery dies, you know exactly what to do. Happy saving!