Is Your DeWalt Battery Charger Failing? How to Tell in 5 Steps
erratic charging times, a defunct power indicator light, or mere failure to charge altogether can suggest your Dewalt battery charger is faulty. But wait, don't toss it aside just yet. Let's diagnose and confirm these suspicions before you conclude it's a goner.
Trying to charge your Dewalt battery and ending up with disintegrating results might leave you screaming, "Why won't my battery charge?" Don't fret, let's get you powered up again.
Symptoms of a Failing Dewalt Battery Charger
Ailing chargers seldomly broadcast their issues loudly. But keeping an eye out for these symptoms can help you discern one:
Firstly, monitor the indicator lights. Dewalt chargers depict their charging status via LEDs. If the lights are flickering, not illuminating, or digging into the 'red zone' longer than usual, that's a red flag waving.
Indicator Lights Gone Wild
Inconclusive or odd indicator light behavior is perturbing. If your charger's light show rivals a rave, it's time to investigate further.
Bulbs flickering as if dancing to unheard music or maintaining an eternally 'red' stance might hint at contact issues. Check terminals for dirt and debris, wipe clean, and retry.
Take Heart Rate into Consideration
Delayed charging is an even more frustrating symptom. When it takes longer than 3-5 hours for full charge, and you've ruled out a dead battery, your charger might be wheezing.
Consider charging duration, if it's longer than specified by Dewalt, it might indicate an internal fault in the charger unit. Check the battery level indicator, a rogue indicator might be displaying a superseded capacity (for instance showing fully charged when it's not).
Testing the Charger: DIY Diagnostics
Verifying your charger's dodgy deed doesn't entail hacking or rocket science, just a swapping act and a multimeter:
Utilize a spare Dewalt battery. Drain it entirely. Plug it into the suspected charger. Accomplish two things: first, ensure the battery's in charge длиаким проективномуällig to avoid a false positive. Secondly, if charging begins, hook up your multimeter to the charger's terminals and verify you're getting the specified 18V or 20V.
Let's Multimeter it Up
This testing method uses a multimeter to measure the continuity and voltage. Test your charger for continuity, which should be 0. Regular resistance is 1. If it's over 1, suspect faulty charger.
Test for voltage. A healthy lame charger should display Dewalt's specified voltage -18V or -20V. If it's lower, suspect damage in the charger's internals.
Let's Not Forget to Give the Battery a Once Over
Despite examining the charger, always double-check the battery. It might not be the culprit if charging commences, but terminates without conclusion.
Dengaged battery: Check the battery's voltage before and after attempting to charge with the multimeter. If it's not gaining or losing volts, your battery's toast. Whether you're dealing with a rogue charger or a defective battery, take it to the professional.
In most cases, once you've discerned the issue, contacting Dewalt's customer service or authorized repairs can fix your problem. While replacing the charger can be the best and quickest solution, don't judge and declare it guilty until you're sure.