Reset Lippert Control: How to Fix in Step-by-Step Guide
Forgetting your Lippert control password or having trouble with your controls resetting? Don't worry, resetting your Lippert control to factory settings is a straightforward process. Let's guide you through it step-by-step.
Before we dive in, it's crucial to understand that resetting your Lippert control will erase all your customized settings and connected devices. Make sure this is what you want to do. If you're certain, let's proceed.
Preparation for the Reset
Before you begin, ensure your coach battery is fully charged. A discharged battery can interfere with the reset process. Also, locate your Lippert control unit. It's usually a box or panel, typically found in the basement or underneath a cabinet.
Once you've found it, identify the “Reset” button. It's usually a small pinhole button, labeled "RESET". You'll need a paperclip or a small pen to press it. If you're using a paperclip, straighten it and bend one end to create a small, sturdy point.
Understanding Your Control Type
Lippert offers various control models. The most common ones are the МС-65, МС-85, and МС-105. The process for each is slightly different. Locate your model number on the control unit to ensure you follow the correct steps.
For the sake of this guide, we'll focus on resetting the most common models, the MC-65 and MC-85. If you have a different model, the basic steps will be similar, but the buttons and labels might vary.
Resetting Lippert Control MC-65 and MC-85
The process for both MC-65 and MC-85 is similar. Here's how to do it:
- Press and hold the "Menu" button until the display shows "System Error".
- Release the "Menu" button, then press and hold the "Reset" button for about 3-5 seconds. The control unit will beep, indicating a successful reset.
The control unit will reboot and be ready to use with the default settings. You can now connect your devices and reconfigure your system.
Post-Reset: Reconfiguring Your System
After the reset, your Lippert control will have its default settings. It's time to reconfigure your system according to your preferences. Start by connecting your devices - slide-outs, awnings, lights, etc.
To reconnect your devices, follow these steps:
- From the main menu, go to "Device Configuration".
- Select the device you want to reconnect and follow the prompts. You may need to hold the device's activation switch while performing the action required by the control.
Repeat this process for all your devices until they're all reconnected. You can now customize your settings and enjoy your coach's features.
Congratulations! You've successfully reset your Lippert control and reconfigured your system. Don't hesitate to reach out to Lippert's customer support if you encounter any challenges or need further assistance.