Switching Made Easy: How to Change Battery in Pro Controller
The Nintendo Switch is a console revolutionary for its hybrid nature, allowing seamless gameplay from your TV to your hands on-the-go. However, like any electronics, its durability depends largely on how well you maintain it. One such maintenance task is replacing the battery in your Pro Controller, as it's not rechargeable through the Switch itself. Here's a comprehensive guide on how to change the battery in your Nintendo Switch Pro Controller.
Before you begin, ensure you have the following items ready: a new set of AA batteries, a crosshead screwdriver (Philips #00), and a secure, well-lit workspace. Let's dive into the process.
Gathering Necessary Tools and Batteries
The Nintendo Switch Pro Controller uses two standard AA batteries. It's recommended to use alkaline or NiMH rechargeable batteries for longevity and optimal performance. Always ensure the batteries you use have the correct polarity, marked '(+)' for positive and '(-)' for negative.
To avoid any inconvenience during the process, double-check that you have all the necessary tools and batteries at hand before proceeding.
Disassembling the Nintendo Switch Pro Controller
With your tools and batteries ready, it's time to disassemble your Pro Controller. Follow these steps carefully:
Step 1: Removing the Screw and Battery Cover
Flip your Pro Controller over and locate the Phillips #00 screw on the back. Using your crosshead screwdriver, gently unscrew it and remove it completely. This screw also secures the battery cover, so once removed, the cover should lift off easily.
The battery cover cleverly conceals the battery compartment, ensuring it's well-protected during regular use. After removing the screw and cover, you'll reveal the battery compartment, which houses the two AA batteries.
Step 2: Removing the Old Batteries
Gently pinch and pull the battery release tabs located on either side of the battery compartment. This should pop the batteries out. If the batteries are stuck, you might need to use a gentle pulling motion while tilted slightly to one side.
Once you've removed the batteries, ensure they're recycled correctly. Many stores have battery recycling bins, and some cities have recycling programs specifically designed for batteries.
Inserting and Securing the New Batteries
Now that you've removed the old batteries, it's time to insert the new ones. Ensure they're correctly oriented, with the positive end marked '(+)' facing upwards and the negative end marked '(-)' facing downwards.
Step 3: Inserting the Battery in the Correct Orientation
Align the battery with the battery slot, ensuring the negative end marked '(-)' goes first. Gently push the battery into its slot until it locks into place and the battery tab snaps shut. Repeat this with the second battery.
While doing this, you might encounter some resistance. If so, double-check your battery orientation and ensure you're not forcing them into the slots.
Step 4: Reassembling the Pro Controller
With both batteries securely inserted, you can now reassemble the Pro Controller. First, replace the battery cover and ensure it's properly seated. Then, reinsert the Phillips #00 screw and gently tighten it. Don't overtighten, as this could strip the screw or damage the controller.
Next, reattach the plastic battery tab cover and ensure it's securely fastened. Finally, test your Pro Controller by sliding it into the Nintendo Switch dock or pairing it with your console. The green battery indicator light should turn on, indicating that the batteries are working.
Congratulations, you've successfully changed the batteries in your Nintendo Switch Pro Controller! With this new set, you can look forward to countless hours of immersive gameplay. If you found this guide helpful, consider bookmarking it for future reference or sharing it with friends who might need assistance with their Switch accessories.