How to Charge the Battery in a 2017 Ford Transit
Attention, 2017 Ford Transit owners! Batteries, like all rechargeable ones, need regular maintenance to keep your vehicle running smoothly. Here's a comprehensive guide on how to charge your 2017 Ford Transit's battery, ensuring you're never stranded with a dead battery again.
Before we dive into the process, it's crucial to understand your Transit's battery system. The 2017 model comes with an AGM (Absorption Glass Mat) battery, which is sealed, maintenance-free, and more durable than traditional flooded lead-acid batteries. Now, let's get started with the charging process.
Pre-Charging Checklist
Before you begin, ensure you have the right equipment and a safe workspace. You'll need a battery charger designed for AGM batteries, a set of safety glasses, and gloves. Always work in a well-ventilated area, away from any fire hazards or children.
Start by checking your battery's condition. AGM batteries should not be charged if the voltage is below 10.5V. If it's lower, it might be too discharged to charge safely. You might need a battery booster or a jump start to revive it.
Locating Your Battery
The 2017 Ford Transit's battery is located under the hood, on the passenger side. Open the vehicle's hood and secure it with the prop rod. Locate the battery, which is a black, rectangular box with positives (+) and negatives (-) terminals.
Note the battery's position and how the cables are connected. It's essential to reattach them correctly after charging to prevent any electrical issues.
Cleaning the Battery Terminals
Corrosion on battery terminals can cause poor electrical connections, leading to charging issues. Inspect the terminals for any white, flaky substance. If present, clean the terminals using a mixture of baking soda and water, followed by a thorough rinse with clean water.
Once clean, dry the terminals with a lint-free cloth. Apply a small amount of petroleum jelly to the terminals to prevent future corrosion.
Charging the Battery
Now, let's begin the charging process. Always follow the charger's instructions, as charging parameters might vary slightly depending on the brand and model.
Connect the charger's clamps to the battery. Ensure the red clamp goes to the positive (+) terminal, and the black clamp goes to the negative (-) terminal. Never allow the clamps to touch during the charging process to prevent short circuits.
Setting the Charger
Set your battery charger to the 'AGM' or 'Absorption' mode. If your charger doesn't have these settings, use the '12V' or 'Car' setting instead. Choose the ' Allgemeine Überfahr' ('General Overdrive') or 'High' amperage setting, usually around 10A to 25A, for optimal charging.
If your charger has an 'Automatic' or 'Taper' setting, use that. It'll adjust the charging rate as the battery charges, ensuring it doesn't overcharge.
Charging the Battery
Plug in the charger and turn it on. Monitor the charger's display for the battery's voltage and charging status. AGM batteries should charge within 4 to 6 hours at the 10A to 25A rate. Avoid leaving the charger connected after the battery has reached full charge, as it may overheat or cause damage.
If your charger doesn't have a built-in float stage, disconnected it once the battery is fully charged. Floats stages maintain the battery's charge at the peak level without overcharging it.
Your 2017 Ford Transit's battery should now be fully charged and ready to go. Remember, preventive maintenance is key to longevity. Regularly inspect your battery's condition, keep it clean, and charge it when needed to ensure it's always in top shape.
Remaining proactive about your Transit's battery health will save you time and money in the long run. Safe charging, and happy driving!