▲Wirig Diagram Hot
▲ ▲ ▼

How to Test if a Car Fuse is Blown

By

Ever found yourself stranded on the side of the road due to a faulty car? It's frustrating, but with a little know-how, you can gain insight into the issue without even leaving your vehicle. A blown fuse is often the culprit behind electrical failures in a car. This article will guide you through the process of checking if a fuse has blown in your car.

Before you begin, ensure you have enough light to see clearly, and always remember safety first. Locate your car's fuse box – it's usually under the hood, under the dashboard, or under a seat. Once you've found it, let's dive into the process.

Understanding Car Fuses

Car fuses are small but powerful components that protect your vehicle's electrical system from damages due to overcurrent. When a fuse blows, it breaks an internal wire, stopping the flow of electricity, thus the term 'blown' fuse.

Blown Fuse in Car Symptoms (Signs + What to Check)
Blown Fuse in Car Symptoms (Signs + What to Check)
Fuse
Fuse
How to Check Car Fuses
How to Check Car Fuses

Most car fuses are 12V and categorized into three types – blade, inline, and spark plug. Understanding the type of fuse and its amperage rating is crucial to replace it effectively.

Finding the Fuse Box

The first step is locating your car's fuse box. Check your vehicle's owner manual for the exact location and type of fuses. Typically, you'll find the main fuse box under the hood or under the dashboard. Some vehicles have two fuse boxes, with the second one tucked away under a seat or in the trunk.

Car Fuse Box ☑️☑️
Car Fuse Box ☑️☑️
How to Check Car Fuses
How to Check Car Fuses
How to Check Your Cars Fuses - Reliable Automotive
How to Check Your Cars Fuses - Reliable Automotive

Once you've located the fuse box, you'll notice that it's usually covered with a plastic fuse box cover for safety. Remove the cover by prying it off or using the release lever, typically located at the bottom.

Identifying the Blown Fuse

Now that you've accessed the fuse box, it's time to identify the blown fuse. The fuse box is organized with a diagram or a list that corresponds to the position of each fuse. The list helps you understand which fuse controls what feature in your vehicle.

When identifying a blown fuse, look for these signs:

Car Fuse Chart Guide | Common Fuse Sizes, Colors & Amp Ratings
Car Fuse Chart Guide | Common Fuse Sizes, Colors & Amp Ratings
An Idiot's Guide to Car Fuses
An Idiot's Guide to Car Fuses
Trafic, Vivaro and Primastar Horn, Battery and Fuse Box location
Trafic, Vivaro and Primastar Horn, Battery and Fuse Box location
a car with the words how to test a carfuse in 10 secs
a car with the words how to test a carfuse in 10 secs
How to Test and Replace a Car Fuse | 2CarPros
How to Test and Replace a Car Fuse | 2CarPros
How to check car for blown fuses with multimeter (electric & electronic DIY diagnostics)
How to check car for blown fuses with multimeter (electric & electronic DIY diagnostics)
  • Visual Telltales: Some fuses have a small glass window that shows a melted wire or a gap inside if the fuse is blown.
  • Broken or Bent Fuse: If you can't see the internal damage, try gently tugging on the fuse. A blown fuse will not move, and its body might be broken or bent.
  • Smell Test: Circuitry problems, including blown fuses, can sometimes cause a burning smell in the fuse box. If you smell something unusual, it might indicate a blown fuse, but it's important to also rule out other electrical issues.

Checking Fuse Continuity

Sometimes, a fuse might not show visible signs of damage but is still faulty. In these cases, you'll need to check the fuse's continuity. This involves verifying that electricity can flow through the fuse. Continuity can be checked using a multimeter or a simple circuit tester.

If you're unsure about using a multimeter, don't hesitate to consult your local mechanic or autoshop. Safety first! Remember that the multimeter should be set to the lowest ohms setting (usually 200 ohms).

Using a Multimeter to Test a Fuse

A multimeter is a versatile tool that measures electrical resistance, voltage, and current. To use a multimeter to check a fuse:

Car Fuses Explained: Types and Uses
Car Fuses Explained: Types and Uses
How to Check Car Fuses
How to Check Car Fuses
an ad for car care with four different colors on the front and back of it
an ad for car care with four different colors on the front and back of it
  1. Turn the multimeter's dial to the continuity setting (usually marked with a sound wave or Omega symbol).
  2. Touch one probe to one end of the fuse and the other probe to the other end.
  3. If the fuse is in good working condition, the multimeter will beep or the display will show a small resistance (usually around 1 ohm). If the fuse is blown, the multimeter won't respond – indicating a break in the circuit.

Using a Circuit Tester

A circuit tester is a simple, inexpensive tool that can accurately test fuses. To use a circuit tester:

  1. Plug the tester into a power point in your vehicle.
  2. Insert the fuse into the tester's fuse slot.
  3. Push the test button. If the light comes on, the fuse is in good working order. If not, it's blown.

Remember: Always replace a blown fuse with the exact same amperage rating to avoid overloading the circuit. Never replace a fuse with a higher-amperage fuse, as this can cause a fire or additional damage.

Regular feature checks and always driving mindful of your vehicle's correct maintenance are the key to keeping your car in top shape. So, the next time you find yourself with a car troubleshooting situation, don't let a blown fuse bring you down. Armed with this guide, you're now equipped to efficiently check and handle car fuse problems. Happy driving!

💬 Comments ↗ Share ★ Save
AD