▲Wirig Diagram Hot
▲ ▲ ▼

"How to Clean Corrosive Ammo in Your AK"

By

Cleaning corrosive ammunition from an AK platform can be a tricky task, but with the right approach and necessary safety precautions, it's}a manageable process. Regular cleaning is essential to maintain your AK's longevity and functionality, especially when dealing with corrosive ammo. Let's dive into the steps for a thorough, yet safe, cleaning of your AK after firing corrosive ammunition.

Before we begin, ensure you're working in a well-ventilated area and have all necessary cleaning supplies at hand. This includes a cleaning rod, bore brush, patches, cleaning solvent, lubricant, and, most importantly, a quality anti-corrosion agent like CLP (Cleaner-Lubricant-Protector).

Preparing Your Cleaning Area and Cleaning Kit

The first step is setting up your cleaning station. Spread out a towel or cleaning mat to protect your work surface. Ensure your cleaning kit is readily accessible, including your anti-corrosion agent, which will be crucial for preventing corrosion caused by corrosive ammo.

Cleaning Brass Cases with Lemi Shine
Cleaning Brass Cases with Lemi Shine
6 Best Gun Cleaning Kits Most Recommended By Experts
6 Best Gun Cleaning Kits Most Recommended By Experts
Secret uses of the AK cleaning kit and disassembly hacks
Secret uses of the AK cleaning kit and disassembly hacks

A word of caution: Always prioritize safety. Wear gloves and eye protection, and keep a trash bag nearby for discarding used patches and other debris. Ensure your AK is unloaded and follow all safety protocols, treating the gun as if it were loaded at all times.

Disassembling Your AK

Before disassembling, make sure the weapon is unloaded and the magazine is removed. Field strip your AK according to its model. For most AK platforms, this involves removing the bolt carrier group, recoil spring, gas tube, and trigger group. Be methodical and remember where each part goes for reassembly.

AK Original Cleaning Kit Review
AK Original Cleaning Kit Review
How to Clean and Take Care of Your Guns - The Prepper Journal
How to Clean and Take Care of Your Guns - The Prepper Journal
3 Best Ammo Calibers To Have After SHTF
3 Best Ammo Calibers To Have After SHTF

Pay particular attention to the disassembly process if you're unfamiliar with your specific AK model. Consult your user manual or a disassembly guide. Remember, reassembly is crucial, so take notes or snap photos as you go to aid in reassembly.

Inspecting Your AK for Corrosion

With your AK disassembled, thoroughly inspect each part, especially those that have come into contact with the ammunition during firing. Look for signs of corrosion, such as pitting, rust, or any unusual discoloration. Pay close attention to the chamber, bolt face, and other internal components.

If you find any corroded parts, make a note of their location before proceeding to the cleaning stage. You may need to focus additional attention on these areas. If corrosion is severe, consider professional cleaning or replacement of the affected parts.

AK-47 Cleaning and Maintenance - Geek Prepper
AK-47 Cleaning and Maintenance - Geek Prepper
This $3 Liquid Kills ALL Rust on Guns and Gear. PERMANENTLY. They Sell You Cerakote Instead
This $3 Liquid Kills ALL Rust on Guns and Gear. PERMANENTLY. They Sell You Cerakote Instead
My New Favorite Way to Clean Gunstocks
My New Favorite Way to Clean Gunstocks
How to Clean an AK-47 Rifle or Other Notoriously Dirty Gun
How to Clean an AK-47 Rifle or Other Notoriously Dirty Gun

Cleaning Your AK

Now that you've inspected your AK, it's time to clean it thoroughly. Using your cleaning rod, pass a wet patch soaked in your cleaning solvent through the barrel until no further residue or debris is picked up. Use your bore brush for stubborn deposits, but be careful not to dig in too aggressively, as this can damage the bore.

Next, clean the receiver, bolt, and other parts. Use a suitable cleaning brush or Q-tip to scrub away any visible residue or corrosion. Be sure to apply your anti-corrosion agent liberally. Allow it to sit for a few minutes to work its magic, then wipe excess away with a clean patch.

Reassembling Your AK

Once clean, allow your AK to dry thoroughly. Again, consult your user manual or a reliable reassembly guide to put your AK back together. Ensure everything fits snugly and correctly, as improper reassembly can lead to malfunctions or damage to your weapon.

Before you finalize reassembly, apply a protective coating of lubricant where appropriate. This helps to protect your AK from future corrosion and keeps moving parts well-lubricated. Remember to wipe away excess lubricant to prevent attracting dust or debris.

Final Inspection and Testing

After reassembly, conduct a final inspection to ensure everything is in working order. Check that the bolt carrier group moves smoothly, and the hammer engages the firing pin correctly. Also, ensure the safety lever functions as intended.

Finally, take your AK to the range for a test fire. Start with a few shots to ensure everything functions correctly and feels right. This is also an excellent opportunity to fine-tune your aim after cleaning and reassembly.

Regular cleaning is a rewarding task, especially when you consider the improved performance and longevity of your AK. However, dealing with corrosive ammunition requires extra care and attention. Always prioritize safety and take your time to ensure a thorough, effective clean. Happy shooting!

💬 Comments ↗ Share ★ Save
AD