▲Wirig Diagram Hot
▲ ▲ ▼

How to Find Least Count of Ammeter & Voltmeter: Class 10

By

In the realm of physics, learning how to measure current and voltage accurately is a crucial skill. If you're a student in class 10 looking to understand how to find the least count of an ammeter and a voltmeter, you've come to the right place. This guide will walk you through the process in a step-by-step manner, ensuring you grasp the concepts firmly.

Before we dive in, let's make sure you understand the basics. An ammeter is used to measure electrical current, while a voltmeter measures electrical potential difference, also known as voltage. The least count of an instrument is the smallest division on its scale, indicating the precision of the measurement. Let's start with the ammeter.

Finding the Least Count of an Ammeter

The least count of an ammeter determines the smallest quantity of current it can measure. It's calculated using the formula:

Ammeter and Voltmeter Placement | Physics Circuit Measurement Notes
Ammeter and Voltmeter Placement | Physics Circuit Measurement Notes
a piece of paper that has some writing on it
a piece of paper that has some writing on it
the class 10 science electricity worksheet is shown with diagrams and symbols on it
the class 10 science electricity worksheet is shown with diagrams and symbols on it

Least Count of Ammeter (A) = (Full-Scale Reading in Ampere) / (Number of Divisions on the Scale)

Step 1: Identify the Full-Scale Reading

The full-scale reading is the maximum current the ammeter can measure, usually printed on the instrument. For instance, if your ammeter can measure up to 5 amperes, that's your full-scale reading.

Ammeter vs Voltmeter
Ammeter vs Voltmeter
Ammeter vs Voltmeter
Ammeter vs Voltmeter
three different voltages are shown in the following diagrams, and each one is connected to an
three different voltages are shown in the following diagrams, and each one is connected to an

Example: Let's say your ammeter has a full-scale reading of 5 amperes (A).

Step 2: Count the Number of Scale Divisions

Next, count the number of divisions on the scale of your ammeter. Each division typically represents a fraction of the full-scale reading.

Example: Suppose your ammeter's scale has 10 divisions.

Galvanometer vs Ammeter | Complete Comparison Cheat Sheet for JEE, MHT CET & Boards
Galvanometer vs Ammeter | Complete Comparison Cheat Sheet for JEE, MHT CET & Boards
V-I Circuit Setup | Ohm’s Law Physics Practical Notes
V-I Circuit Setup | Ohm’s Law Physics Practical Notes
Electricity formulas
Electricity formulas
an electronic multimeter with instructions on how to use it and what to use them
an electronic multimeter with instructions on how to use it and what to use them
a chalkboard menu with the words amps, volts and wattts written on it
a chalkboard menu with the words amps, volts and wattts written on it
Class 10 Physics Electricity Formulas 🔥 Quick Revision | Class 10 Science
Class 10 Physics Electricity Formulas 🔥 Quick Revision | Class 10 Science

Calculating the Least Count

Now that you have the full-scale reading and the number of divisions, you can calculate the least count.

Example: Using our values from above, the least count (A) would be (5 A) / (10 divisions) = 0.5 A or 0.5 ampere.

Finding the Least Count of a Voltmeter

The process to find the least count of a voltmeter is similar to that of an ammeter. The least count formulas are:

a table with numbers and times on it
a table with numbers and times on it
an info sheet showing the different types of units and their corresponding measurements for each unit
an info sheet showing the different types of units and their corresponding measurements for each unit

Least Count of Voltmeter (V) = (Full-Scale Reading in Volt) / (Number of Divisions on the Scale)

Step 1: Identify the Full-Scale Reading

Like the ammeter, the voltmeter's full-scale reading is the maximum voltage it can measure. It's usually printed on the instrument. If your voltmeter can measure up to 10 volts, that's the full-scale reading.

Example: Let's say your voltmeter has a full-scale reading of 10 volts (V).

Step 2: Count the Number of Scale Divisions

The number of divisions on the voltmeter's scale is needed, similar to the ammeter.

Example: Suppose your voltmeter's scale has 20 divisions.

Calculating the Least Count

Using the formula above, calculate the least count.

Example: With our values, the least count (V) would be (10 V) / (20 divisions) = 0.5 V or 0.5 volt.

Practice these calculations with different full-scale readings and divisions to truly understand the concept. Remember, the least count indicates the smallest change in the reading that can be detected by the instrument. Keep exploring, and you'll master these measurements in no time!

💬 Comments ↗ Share ★ Save
AD