Mastering PEX Piping: How to Pinch Clamp Like a Pro
Ever found yourself in a plumbing project, face to face with PEX tubing and clamps, wondering how to connect them seamlessly? Worry not, as we're here to guide you through the process of pinch clamps on PEX like a pro. Let's dive right in, starting with the basics.
Before we begin, let's ensure you have the right tools and materials. You'll need PEX tubing, stainless steel clamps, a PEX stakes tool (also known as a clamp crimping tool), some hacksaw or tubing cutter for PEX, and tee or elbow fittings. Now, let's get started.
Understanding PEX and Pinch Clamps
PEX, or cross-linked polyethylene, is a flexible plumbing tubing widely used for its easiness to install and durability. Pinch clamps, on the other hand, are stainless-steel devices used to secure PEX to brass fittings. They apply pressure evenly around the tubing when crimped, creating a secure, leak-free connection.
First, familiarize yourself with the terms. The smaller, more narrow part of the clamp is the 'jaw', and the larger, u-shaped part is the 'body'. Now that you're up to speed let's move onto preparing your PEX tubing.
Preparing PEX Tubing
Before you attach any fittings, the PEX tubing needs to be ready. First, use your hacksaw or tubing cutter to cut the PEX to the required length. Remember, it's always better to cut a little longer and trim it later than to cut it short.
Next, strip about 1/2 inch of the PEX lining from the tubing. This is crucial because the clamps will be crimped directly onto the PEX, not the lining. You can use a utility knife for this task, carefully scoring and peeling off the lining.
Securing the Clamp
Now that your PEX tubing is ready, it's time to secure the clamp to the fitting. Begin by sliding the clamp over the PEX tubing. Ensure the 'jaw' of the clamp is facing away from the fitting. This will allow the clamp to slide easily onto the fitting later.
Next, slide the fitting onto the PEX tubing. The tubing should fit snugly into the fitting, with about 1/4 inch of the tubing sticking out beyond the fitting.
Crimping the Pinch Clamp
You're almost there! Now it's time to use your PEX stakes tool to crimp the clamp. Before you do, ensure the tool's jaws are the right size for your clamp. The wrong size can either damage the clamp or result in a poor crimp.
Open the tool's jaws, place them on either side of the clamp, and squeeze the handles together. You should hear a 'clunk' as the jaws come together, indicating a proper crimp. Hold the tool in place for about 30 seconds to ensure a strong, lasting connection.
Testing Your Work
You've joined your PEX tubing and fitting, but now comes the crucial part: testing your work. Turn on the water to check for any leaks. If water flows smoothly without any leaks, you've successfully pinch clamped PEX!
If there's a leak, don't despair. Turn off the water, dry the fitting, and inspect the crimp. If it's improper, you'll probably have to replace the clamp and try again. With practice, you'll get it right every time.
Remember, patience and precision are key when it comes to pinch clamps on PEX. Don't rush, and always double-check your work. Happy plumbing!