**Step-by-Step: Replace Battery in Nintendo Switch Pro Controller**
Tired of your Nintendo Switch's battery life not lasting as long as you'd like? Revitalize your Switch Pro Controller by learning how to replace its battery. This step-by-step guide will walk you through the process, ensuring you understand each step to keep your gaming experience uninterrupted.
Before you start, it's essential to gather the right tools and materials. You'll need a Phillips #00 screwdriver, a new battery (preferably a 3.7V 450mAh Li-ion battery), tweezers, and some patience. Once you have everything ready, let's dive into the process.
Safely Prepping Your Controller
Begin by turning off your Switch and removing your controller from pairing. This precaution ensures safety during the battery replacement process.
Next, carefully flip your controller over. You'll see several screws along the bottom edge. Using your Phillips #00 screwdriver, gently remove these screws. Set them aside in a safe place to avoid losing any during the procedure.
Open the Controller Case
Once all the screws are removed, use your hands to carefully pry open the controller case. Start from one corner and work your way around the edges using a plastic opening tool or a flathead screwdriver. Be patient; it may take some gentle wiggling to separate the case.
With the case open, you'll find the internal components. Before proceeding, make sure to disconnect the small internal battery door from its connector. This step ensures you don't damage any components while separating the case.
Removing the Old Battery
Locate the battery inside the controller. It's usually secured by a small piece of adhesive. Carefully use your tweezers to peel back this adhesive and lift the battery out. You may need to gently lift the battery connector to release it from the board.
Once removed, inspect the old battery. If it's salvageable, you can always use it as a backup or in another project. If not, dispose of it responsibly according to your local recycling guidelines.
Installing the New Battery
Compare your new battery to the old one to ensure they're a perfect match. If they aren't, you may need to trim the battery's wires slightly to fit it into the controller's case.
Using your tweezers, carefully connect the new battery's positive and negative terminals to their corresponding pads on the controller board. Ensure the battery is correctly aligned and fits snugly within the case.
Reconnecting the Internal Battery Door
Before reattaching the internal battery door, double-check that the new battery is securely connected. Then, carefully reconnect the small battery door to its original position.
If the door doesn't fit seamlessly, gently bend the plastic to accommodate the new battery's thickness. Be careful not to break or damage the door during this process.
Assembling the Controller Case
Now that the new battery is installed and the internal battery door is reconnected, it's time to reassemble the controller case. Carefully align the two halves and begin pressing them together.
Use your thumbs to apply firm, even pressure around the edges of the case. Once the case is completely reassembled, reinsert the screws you removed earlier. Tighten them gently, ensuring they're secure but not over-tightened.
Congratulations! You've successfully replaced your Switch Pro Controller's battery. The next time you use your controller, you'll notice an improved playtime. Don't forget to test your new battery by playing your favorite games. Happy gaming!