Reset Navien Tankless Water Heater: A Step-by-Step Guide
Ever found yourself in a cold shower, thinking, "Didn't I just reset my Navien tankless water heater?" It's frustrating, but don't worry, resetting your unit isn't rocket science. Let's dive in and tackle the issue step by step.
Before we start, safety first! Ensure your water heater is turned off at the circuit breaker and the main water supply valve is closed. Also, have your owner's manual handy as models might differ slightly.
Resetting the Main Control Board
The main control board manages your heater's operations. A reset here might fix the issue. Here's how:
1. **Access the Control Panel**: Open the service door, usually located at the bottom of your unit.
2. **Locate the Reset Button**: It's usually red and situated near the control board. If you're unsure, consult your manual.
Soft Reset
Performing a soft reset is easy and non-invasive:
1. Press and hold the reset button for about 5-10 seconds. The display should flash, indicating a successful reset.
2. Release the button and wait for the heater to initialize. This might take a few minutes.
Hard Reset
If a soft reset doesn't work, it's time for a hard reset. Before proceeding, ensure you've unplugged your unit and turned off the water supply:
1. Remove the main control board. Usually, it's secured with screws. Again, consult your manual if you're unsure.
2. Wait for 30 minutes. This allows any residual power to dissipate. Then, reinsert and secure the board.
3. Plug your unit back in and turn on the water supply. Your heater should now initialize.
Resetting the Error Code
Sometimes, resetting the main control board doesn't solve the issue. In this case, you might need to reset the error code:
1. **Understand the Error**: Navien's error codes are four-digit numerals. Each code signifies a different issue. Refer to your manual or Navien's support page for interpretation.
Resetting the Error Code
With the error code in mind, follow these steps:
1. Access the control panel as before.
2. Use the navigation buttons (usually labeled with arrows) to select the 'Error' option.
3. Press and hold the '+' button for about 5 seconds. The display should show 'Error Reset'.
4. Press the '-' button to scroll through the options. Select 'Reset' using the '+' button, then press 'OK' to confirm.
Remember, if none of these steps work, or if your unit displays a recurring error, don't hesitate to contact a professional. Attempting to fix a complex issue like this on your own could void your warranty and potentially damage your unit.
Lastly, always keep your manual handy. It's your unit's most comprehensive guide, and it can significantly expedite the troubleshooting process. Happy resetting!