Measuring Swa Cable Size: A Step-by-Step Guide
Determining the size of the South West Airlines (SWA) cable is a crucial step before any operation. The accuracy of this measurement significantly impacts the safety and efficiency of your project. This guide will walk you through the process of how to tell the size of SWA cable.
Before we dive into the details, let's ensure you have the right tools. You'll need a cable cutter or stripper, a clipboard with graph paper, a ruler or tape measure, a notepad and pen, and of course, safety gear. SWA stands for "Standard Wire Gauge," and the size refers to the cable's diameter, which can vary from small (lower number) to large (higher number).
Understanding SWA Cable Sizes
The first step in determining the size of your SWA cable is understanding the size chart. SWA sizes range from 10 to 50, with each incremental size representing a 20% reduction in cross-sectional area.
For example, a SWA 10 cable has a diameter of approximately 8.6 millimeters and a cross-sectional area of 57.8 square millimeters. In contrast, a SWA 16 cable has a diameter of about 6.2 millimeters and a cross-sectional area of 30.8 square millimeters. The chart below illustrates this:
| SWA Size | Diameter (mm) | Cross-sectional Area (mm²) |
|---|---|---|
| 10 | 8.6 | 57.8 |
| 16 | 6.2 | 30.8 |
Using the Cable Stripper Method
The cable stripper method involves exposing a small section of the cable's conductor to measure its diameter. Here's how to do it:
First, use your cable stripper to carefully remove a small section of the cable's insulation, exposing a few centimeters of the copper core. Be cautious not to damage the core. Then, use your ruler or tape measure to carefully measure the diameter of the exposed copper. Compare this measurement to the SWA size chart above to determine the cable's size.
Using the Cable Cutting Method
The cable cutting method involves cross-sectioning the cable to measure its internal diameter. This method is more precise but also more destructive. Here's how:
1. Use your cable cutter to carefully cut through the cable, ensuring you get a clean, flat cut. 2. Use your clipboard and graph paper to make a rubbing of the cut end, creating a one-to-one scale representation of the cross-section. 3. Measure the diameter of the inner circle (copper core) and compare it to the SWA size chart to determine the cable's size.
Calculating SWA Cable Length
Now that you know how to determine SWA cable size, let's discuss how to calculate the length of your cable. Measuring the length isn't as straightforward as it seems. Cables can stretch and shrink, plus there's the issue of slack. Here's a simple method:
First, determine the straight-line distance between the start and end points of your cable run. This is the shortest distance between the two points, often called the "as-the-crow-flies" distance. Then, multiply this distance by a factor based on the cable's size:
- For SWA 10 to SWA 16 cables, use a stretch factor of 1.05 ( meaning the cable will be 5% longer than the straight-line distance).
- For SWA 25 to SWA 50 cables, use a stretch factor of 1.03 ( meaning the cable will be 3% longer than the straight-line distance).
Accounting for Slack
Always account for slack in your calculations. Slack is the extra cable you leave at each end of your run to ensure you have enough cable to make repairs or adjustments. The amount of slack needed varies depending on the situation, but a general rule is to add 20% to your calculated length for slack.
For example, if your straight-line distance is 100 meters, your final cable length calculation might look like this:
Final length = Straight-line distance × Stretch factor × Slack factor
Final length = 100m × 1.05 × 1.20 = 132 meters
And that's it! You now know how to tell the size of SWA cable and calculate its length. Happy wiring!