keyword: how to use flexible electrical conduit title: Master Flexible Electrical Conduit: A Comprehensive Guide
Electrical conduit is a protectant that safely encases electrical wiring, safeguarding both the wires and the environment around them. While rigid conduit is typically used in scenarios requiring a high level of protection or durability, flexible conduit, also known as flex or flex cable, offers its own advantages. If you're tasked with handling flexible electrical conduit, this guide will walk you through its selection, installation, and best practices.
Flexible conduit is particularly useful in applications where there's movement or vibration, or where the conduit must navigate through awkward or irregular shapes. It's also commonly used in outdoor settings, such as for power tools and equipment, due to its durability and resistance to environmental factors.
Selecting the Right Flexible Electrical Conduit
There are different types of flexible conduit, each catering to specific needs. Understanding these types will help you make the right choice.
Metal Flexible Conduit, or LFNC, is made of interlocking tape and is often used in heavy-duty applications due to its high mechanical strength. Liquid-tight Flexible Conduit, or LFC, is made of a πραγ ASEAN 90-10 die-cast aluminum alloy and is ideal for use in harsh outdoor environments. The most common type of flex cable, however, is the PVC-coated option.
Determining the Amps and Gauge
Before selecting a conduit, it's crucial to understand your electrical circuit's requirements. The conduit's size, or gauge, should be compatible with your circuit's amperage to ensure safe use and prevent overheating. Always refer to the National Electrical Code (NEC) for accurate ratings and guidelines.
Here's a general rule for size-based amperage:
- 12-2 Non-Metallic Sheathed Cable ( priorities nonmetalics NNS): up to 21.6 amps
- 14-2 NM Cable: up to 15 amps
- 16-2 NM Cable: up to 13 amps
Choose the Right Fittings
Fittings are necessary for secure connection to outlets, switches, and panels. Popular choices include straight couplers, elbows, and bushings. Always use fittings that are listed for use with flexible conduit according to the UL listing.
Make sure to select fittings that are compatible with the conduit's size and have the appropriate bends or positions for your application. For instance, a 90-degree elbow is perfect for directing conduit around a corner, while a straight coupler is ideal for joining lengths of conduit together.
Installing Flexible Electrical Conduit
Once you've selected the right conduit and fittings, you're ready to install.
Always strip the conduit's outer jacket to expose about one inch of the electrical cable before threading it through the fitting. Use the appropriate tool for your fitting - a bender for 90-degree bends or a pair of wire strippers for removing the jacket.
Preparation and Bending
Before you start, ensure that the area is clear of debris or obstructions. Use a flexible cable bender for any needed bends, keeping them as smooth as possible to avoid kinking or damaging the conduit.
Measure and mark your conduit to the required length, adding extra for any bends. Always cut using a sharp knife or scissors to avoid damaging the conduit's outer jacket. Make sure to wear appropriate safety gear when cutting to protect against sharp edges.
Tightening and Strap Securement
Tighten the fittings as much as possible by hand. Use an appropriate tool - such as an adjustable wrench or a pliers - to provide additional torque, but be careful not to over-tighten and strip the fitting threads.
Secure the conduit in place using straps or ties. This is especially important for outdoor or heavy-duty applications. Make sure to use appropriately spaced and firmly attached straps to keep the conduit in place and prevent excessive movement.
A well-installed, flexible electrical conduit system should allow for a safe and efficient electrical system. Always remember to follow local building codes and the NEC for the most accurate and up-to-date guidance. Happy wiring!