International Wire Gauge vs AWG: Understanding the Difference
When it comes to measuring electrical conductor sizes, two primary standards are commonly used: International Wire Gauge (IWG) and American Wire Gauge (AWG). Both systems serve the same purpose but with some differences that can lead to confusion. Let's delve into the intricacies of each to ensure you make the most informed decisions when choosing wire gauges.
Understanding International Wire Gauge (IWG)
The IWG system is widely used in the United Kingdom and many other parts of the world. It's designed for solid and stranded conductors, with larger numbers indicating smaller diameters.
The calculation for IWG is based on the metric system, using the square of the diameter. This results in larger numeric values for smaller diameters, unlike AWG where larger numbers indicate larger diameters.
IWG for Solid Conductors
For solid conductors, IWG follows a simple formula: IWG = 1 + 36 * log10(1/diameter in mm). This allows for a wide range of diameters, from 0.05mm to around 50mm.
Here's an example: A solid copper wire with a diameter of 1.5 mm would be IWG 22, calculated as IWG = 1 + 36 * log10(1/1.5).
IWG for Stranded Conductors
For stranded conductors, an additional factor, b, is added to the IWG formula. This factor depends on the number of strands and their lay length. IWG = 1 + 36 * log10(1/diameter in mm) + b.
For example, a stranded copper wire with a diameter of 1.5 mm and 7 strands with a lay length of 100 mm would have an IWG of approximately 20.57, with b being about 0.43 for this configuration.
American Wire Gauge (AWG)
AWG, or Brown & Sharpe Wire Gauge, is predominantly used in the United States and other countries that follow the imperial system. It also indicates the size of both solid and stranded conductors, with larger numbers for smaller diameters.
The AWG system has a fixed increment of 0.001 inches for solid conductors and 0.002 inches for stranded conductors, with #0000 being the largest and 36 the smallest.
AWG for Solid Conductors
AWG uses a straightforward formula for solid conductors: AWG = 36 - 36 * log10(diameter in inches). The diameter range is from 0.005 inches (#0000) to around 0.082 inches (36).
As an example, a solid copper wire with a diameter of 0.013 inches would be AWG 14, calculated as AWG = 36 - 36 * log10(0.013).
AWG for Stranded Conductors
For stranded conductors, AWG follows the same formula as solid conductors but with a different diameter range. Stranded wires range from #0000 (0.005 inches) to around #38 (0.018 inches).
In the case of a stranded copper cable with a total diameter of 0.020 inches and 19 strands of 0.002 inches each, the AWG would be around #22. Here, we calculate the total diameter and then use the AWG formula for solid conductors.
When working with electrical wiring, it's essential to understand the differences between IWG and AWG to ensure you're using the correct gauge for your application. Always double-check the specifications of your equipment and consult with a professional if you're unsure. Stay safe and informed!