▲Wirig Diagram Hot
▲ ▲ ▼

Is It Safe to Upgrade from 15 to 20 Amp Breakers?

By

There's a common misconception among homeowners that it's safe to simply upgrade from a 15-amp to a 20-amp breaker to accommodate higher electrical demands. However, this decision can have serious implications without a thorough understanding of electrical systems and local building codes.

Breakers, a crucial component of your home's electrical system, are designed to protect your wiring from overloading, trips when the circuit draws too much current. Replacing a 15-amp breaker with a 20-amp one may seem like a straightforward solution to powering more devices or appliances, but it's not as simple as swapping a breaker.

Understanding Amperage and Wiring Capacity

Amperage refers to the strength of the electrical current flowing through your wires. In layman's terms, it's the capacity of your electrical system to carry electricity. A 20-amp breaker can handle more electrical load than a 15-amp one, but this doesn't necessarily mean your wiring can safely handle that increased load.

the words electrical can i replace a 15 ampere circuit breaker with a 20 ampere breaker
the words electrical can i replace a 15 ampere circuit breaker with a 20 ampere breaker
What to Do if Your Circuit Breaker Won't Reset?
What to Do if Your Circuit Breaker Won't Reset?
an electrical box with the words breaker box basics what every homeowner should know
an electrical box with the words breaker box basics what every homeowner should know

Electrical wiring is gauge-rated, with larger wires defined by smaller numbers (e.g., 12/2, 14/2). The gauge of your wiring determines its amperage-carrying capacity. For instance, 14/2 non-metallic (NM) or romex sheathed cable is rated for only 15 amps, while 12/2 can handle up to 20 amps.

Why Upgrading to a 20-Amp Breaker Without Upgrading Wiring is Risky

Replacing a 15-amp breaker with a 20-amp one without ensuring your wiring can handle that increased load creates a dangerous scenario. If your wiring can't safely handle 20 amps, installing a 20-amp breaker invites a risk of electrical shorts, overheating, or even fires. Worse still, your breaker may not trip as easily at higher current levels, leading to possible property damage or injuries.

Bad Breaker
Bad Breaker
How To Replace Or Move A Circuit Breaker
How To Replace Or Move A Circuit Breaker
Can Circuit Breakers Go Bad? How to Tell if a Circuit Breaker is Bad
Can Circuit Breakers Go Bad? How to Tell if a Circuit Breaker is Bad

Moreover, most local building codes don't allow upgrading a breaker without upgrading the corresponding wiring and sometimes, even the outlet or device it's connected to.

Safety First: Always Upgrade Wiring Simultaneously

If you're planning an upgrade, consider upgrading your entire circuit to handle the increased load safely. This involves upgrading both your breaker and your wiring to match the new amperage of your breaker. Always consult local electrical codes and, for your safety, consider hiring a licensed electrician to do the work.

For instance, upgrading from a 15-amp to a 20-amp circuit would usually involve upgrading your wiring from 14/2 to 12/2 for safe compatibility.

Breaker Won’t Reset? Here’s What to Check First
Breaker Won’t Reset? Here’s What to Check First
What are 15 amp breakers used for? - The Engineering Knowledge
What are 15 amp breakers used for? - The Engineering Knowledge
How Many Outlets on a 15 Amp Circuit Breaker?
How Many Outlets on a 15 Amp Circuit Breaker?
Breaker Box Basics: What You Should Know
Breaker Box Basics: What You Should Know
How to Reset a Circuit Breaker
How to Reset a Circuit Breaker
Why Your Breaker Keeps Tripping (and What to Do)
Why Your Breaker Keeps Tripping (and What to Do)

importancia of Professional Installation and Inspection

Besides potential safety hazards, DIY electrical work can void manufacturer warranties, potentially impact your homeowner's insurance, or even delay the selling process if not done correctly.

Always consult with a professional electrician before making any upgrades. A professional will ensure your new electrical load is compatible with your system and that all the work is up to code.

Seek Expertise if You're Unsure

If you're unsure about your home's electrical system or the best way to upgrade, don't hesitate to consult a professional. Licensed electricians have the knowledge, experience, and tools needed to ensure your electrical system is safe and efficient.

Can 15 Amp Outlets Be Used On A 20 Amp Circuit Breaker
Can 15 Amp Outlets Be Used On A 20 Amp Circuit Breaker

They'll perform necessary tests to determine if your system can handle the increased load and make the necessary upgrades safely and in compliance with local regulations.

A well-maintained and upgraded electrical system can significantly add value to your home, improve safety, and provide the power you need. So, don't skimp on safety; always consult an expert when dealing with your home's electricity.

💬 Comments ↗ Share ★ Save
AD