PLA Safety for 3D Printing: Is It Safe?
If you're considering 3D printing, you might be wondering, "Is PLA safe for 3D printing?" The short answer is yes, but there's more to consider when discussing the safety of Polylactic Acid (PLA).
PLA is one of the most commonly used materials in desktop 3D printing due to its low cost, low warping properties, and ease of use. It's a biodegradable thermoplastic derived from renewable resources like cornstarch or sugarcane, making it an eco-friendly option. But what about its safety?
Chemical Composition of PLA
PLA is non-toxic and food-safe, which means it contains no harmful substances that can leach out to cause harm. Its chemical composition includes polylactic acid, which breaks down into harmless lactic acid when exposed to moisture and heat.
However, it's important to note that while PLA itself is safe, 3D printed PLA objects that have been exposed to high temperatures during printing may release small, insignificant amounts of lactic acid. Yet, this is far below the threshold at which it could cause any harm.
Processing Temperatures
Most desktop 3D printers print PLA at temperatures between 190°C to 220°C. While these temperatures are hot enough to melt the PLA, they're typically not high enough to cause any significant off-gassing of harmful substances. However, prolonged exposure to these high temperatures, as is the case with large printed objects or dual extruder printers that have hot ends running continuously, might slightly increase the possibility of minor off-gassing.
Furthermore, these temperatures are far lower than those reached in industrial processes, such as cooking or vehicle exhaust, where heat is usually much higher and potentially more harmful due to the presence of other substances like catalyst poisons or pollutants.
PLA Consumption and Allergic Reactions
There have been no reported cases of allergic reactions to PLA. Since it's a natural material, it's less likely to cause any irritations. However, it's always a good idea to avoid contact with the hotprinted material as it can cause burns.
Swallowing or inhaling PLA dust is what you should really avoid, as any material, if ingested in large amounts, can cause harm. To minimize this risk, ensure you're using a well-ventilated workspace and a proper dust collection system when sanding or drilling your 3D printed objects.
Safe Handling and Printing Practices
While PLA is generally safe, some safety measures can ensure minimal exposure to PLA dust and hot printed objects.
Always wear gloves and safety glasses when handling hot objects, and use a dust mask when sanding or drilling to minimize PLA dust inhalation. Regularly clean your workspace to keep PLA dust to a minimum, and always store PLA filament in a cool, dry place.
PLA and Recycling
PLA is a biodegradable material, which means it can safely return to the Earth's ecosystem without leaving any harmful residuals. However, it does require specific industrial composting conditions to break down, typical household composting won't suffice.
Some communities have recycling programs for PLA, but it's often the case that it needs to be collected separately from other waste. To check the feasibility of PLA recycling in your area, get in touch with your local waste management authority.
So, is PLA safe for 3D printing? Yes, it is, as long as you respect the material, use it responsibly, and follow safe handling practices. With the right care and mindfulness, PLA can be a fantastic, safe, and eco-friendly choice for your 3D printing needs.