▲Wirig Diagram Hot
▲ ▲ ▼

(TCO) Resistance: Is Temp Coefficient Constant?

By

The temperature coefficient of resistance is a critical factor in electronics, as the temperature change can significantly affect a material's resistance. But is this coefficient constant? Let's delve into this question and explore the intricacies of temperature-dependent resistance.

To understand this phenomenon, we must first grasp the definition of the temperature coefficient of resistance (TCR). TCR is essentially the change in resistivity of a material with respect to temperature, often expressed in parts per million per degree Celsius (ppm/°C).

Theoretical Considerations

In an ideal world, the TCR would be constant across all temperatures. This assumption underpins many of our electrical engineering models and designs. However, real-world materials don't always behave this way.

Temperature Dependence Of Resistivity
Temperature Dependence Of Resistivity
Physics - E&M: Ch 40.1 Current & Resistance Understood (15 of 17) Temp. Coefficient of Resistivity
Physics - E&M: Ch 40.1 Current & Resistance Understood (15 of 17) Temp. Coefficient of Resistivity
EFFECT OF TEMPERATURE ON RESISTANCE, GSEB Physics practical std 8 to 12
EFFECT OF TEMPERATURE ON RESISTANCE, GSEB Physics practical std 8 to 12

To illustrate this, consider metallic conductors and semiconductors. In metals, the number of free electrons that can carry current remains relatively constant with temperature change. As a result, their TCR is nearly zero and thus produces a constant resistance.

Metallic Conductors

Copper, for instance, has an exceptionally low TCR, around 3900 ppm/°C. This means its resistance only increases by about 0.039% per degree Celsius rise. Such a low TCR leads to copper being used in applications where constant resistance is crucial, like resistors and wiring.

a piece of paper with some writing on it
a piece of paper with some writing on it
What Is Thermistor | Thermistor Types And Characteristics
What Is Thermistor | Thermistor Types And Characteristics
Electronics - An NTC thermistor is a temperature-sensitive resistor whose resistance decreases as temperature increases. In this circuit, the thermistor R₁ and the fixed resistor R₂ form a voltage divider powered by a 12 V supply. The voltage developed at the junction of the two resistors is labeled VTEMP. An operational amplifier is connected as a voltage follower, so the output voltage VOUT is equal to VTEMP while providing a low-impedance output that can drive other circuits without affecting the measurement. At 25°C, the thermistor resistance is 10 kΩ and R₂ is 1 kΩ. Using the voltage divider equation, VOUT = (R₂ / (R₁ + R₂)) × V the output voltage becomes VOUT = (1000 / (10000 + 1000)) × 12 = 1.09 V At 100°C, the thermistor resistance decreases significantly to about 100 Ω. Applying the same equation, VOUT = (1000 / (100 + 1000)) × 12 = 10.9 V These calculations show that the output voltage increases as temperature rises because the resistance of the NTC thermistor decreases. By measuring VOUT, the temperature can be estimated accurately after calibration. Thermistor-based temperature sensing circuits are widely used in thermostats, battery management systems, medical instruments, household appliances, and industrial control systems because they are inexpensive, sensitive, and easy to interface with analog or digital electronics. #Thermistor #TemperatureSensor #ElectronicsEducation #ElectronicsRD | Facebook
Electronics - An NTC thermistor is a temperature-sensitive resistor whose resistance decreases as temperature increases. In this circuit, the thermistor R₁ and the fixed resistor R₂ form a voltage divider powered by a 12 V supply. The voltage developed at the junction of the two resistors is labeled VTEMP. An operational amplifier is connected as a voltage follower, so the output voltage VOUT is equal to VTEMP while providing a low-impedance output that can drive other circuits without affecting the measurement. At 25°C, the thermistor resistance is 10 kΩ and R₂ is 1 kΩ. Using the voltage divider equation, VOUT = (R₂ / (R₁ + R₂)) × V the output voltage becomes VOUT = (1000 / (10000 + 1000)) × 12 = 1.09 V At 100°C, the thermistor resistance decreases significantly to about 100 Ω. Applying the same equation, VOUT = (1000 / (100 + 1000)) × 12 = 10.9 V These calculations show that the output voltage increases as temperature rises because the resistance of the NTC thermistor decreases. By measuring VOUT, the temperature can be estimated accurately after calibration. Thermistor-based temperature sensing circuits are widely used in thermostats, battery management systems, medical instruments, household appliances, and industrial control systems because they are inexpensive, sensitive, and easy to interface with analog or digital electronics. #Thermistor #TemperatureSensor #ElectronicsEducation #ElectronicsRD | Facebook

However, even metals aren't entirely immune to changes in TCR at very high temperatures or low temperatures, where electron scattering and other quantum effects can come into play.

Semiconductors and Insulators

Contrary to metals, semiconductors exhibit significant changes in resistance with temperature. Their electron mobility and concentration vary drastically, leading to a much higher TCR.

Take silicon, for example. Its TCR ranges from 60 to 90 ppm/°C, depending on the doping level. This vast difference from metals makes semiconductors unsuitable for constant resistance applications. Instead, they shine in temperature-sensing applications, like thermistors.

Resistances
Resistances
Thermistor NTC Vs PTC : Resistance curve
Thermistor NTC Vs PTC : Resistance curve
foarcelsius-to-fahrenheit
foarcelsius-to-fahrenheit
a hand is holding a thermometer with hot and cold liquid coming out of it
a hand is holding a thermometer with hot and cold liquid coming out of it
RTD Sensors
RTD Sensors
the temperature scale is shown with different numbers and symbols in each section, as well as two
the temperature scale is shown with different numbers and symbols in each section, as well as two

Practical Implications

Understanding the TCR can guide material selection in different scenarios. For instance, when designing heaters, materials with a positive TCR help achieve self-regulating temperatures—something used in electric blankets or underfloor heating.

Conversely, when stability is key, like in resistors, one should choose materials with low or constant TCR. This choice minimizes resistance drift, keeping the device's performance consistent.

Temperature Compensation

In critical applications where temperature fluctuations can't be avoided, engineers often use temperature compensation. This technique involves Freunde circuits or optional components that counteract resistance changes due to temperature.

two different types of thermostaers are labeled in black and white, with words describing
two different types of thermostaers are labeled in black and white, with words describing
thermoducivity and conduct are shown in this diagram
thermoducivity and conduct are shown in this diagram
resistivity (rho) VS resistance (R) / electric current and ohm's law/ class 12th physics
resistivity (rho) VS resistance (R) / electric current and ohm's law/ class 12th physics

However, these solutions add to the system's complexity and cost. Therefore, selecting materials with a constant TCR, like metals in many instances, is often an easier and more economical solution.

Measurement and Calibration

To determine TCR accurately, scientists and engineers rely on precision measurement equipment, such as Wheatstone bridges or four-terminal sensing. This process involves measuring resistance at different temperatures and calculating the TCR using the following formula:

TCR = [(R2 - R1) / (R1(T1) * (T2 - T1))] * 10^6

Where R2 and R1 are the resistances at temperatures T2 and T1, respectively.

A thorough understanding of the temperature coefficient of resistance is vital for designing reliable, long-lasting electronic devices. While it's not constant across all materials and conditions, recognizing when and how it varies can significantly enhance your designs and applications.

💬 Comments ↗ Share ★ Save
AD