▲Wirig Diagram Hot
▲ ▲ ▼

Redarc Tow Pro: Expert Setup Guide

By

The REDARC Tow-Pro Elite is a popular choice among vehicle enthusiasts seeking a top-notch electric trailer brake controller. This innovative device ensures your towing experience is safe and confident, no matter the terrain or load. Setting it up correctly is vital to harness its full potential.

Before diving into the setup process, it's crucial to understand that the Tow-Pro Elite is designed for both electric trailer brakes and electric and hydraulic ABS brakes. It's universally compatible with trailers equipped with electric brake systems, making it a versatile addition to your towing arsenal.

The Initial Setup

The initial setup involves locating the vehicle's battery and installing the installation kit. The Tow-Pro Elite mounts conveniently on your dashboard, keeping it easily accessible for adjustment while driving. Here's how to get started:

Redarc Tow Pro Elite V3 - Mike Collister
Redarc Tow Pro Elite V3 - Mike Collister
REDARC Tow-Pro Elite Trailer Brake Controller Install & Overview
REDARC Tow-Pro Elite Trailer Brake Controller Install & Overview
Redarc Tow Pro Trailer Brake Controllers
Redarc Tow Pro Trailer Brake Controllers

Firstly, identify your vehicle's battery location. Most vehicles have their battery near the engine, but it's always a good idea to check your owner's manual to be sure. Next, unpack the installation kit, which includes a wiring loom, a vehicle-specific plug, and a fusebox.

Wiring the Battery

Unscrew the battery fused link from the battery terminals and connect the wiring loom. Ensure the main power cable is connected to the positive battery terminal and the earth cable to the negative terminal. Secure the fusebox nearby for easy access.

Parts Bin: Redarc's Tow-Pro Elite Brake Controller is Specifically Designed for Off-Road Towing
Parts Bin: Redarc's Tow-Pro Elite Brake Controller is Specifically Designed for Off-Road Towing
Redarc Tow-Pro Elite
Redarc Tow-Pro Elite
AL-KO Toughest Tow Test 2018: Redarc Tow Pro Elite
AL-KO Toughest Tow Test 2018: Redarc Tow Pro Elite

Check your vehicle's wiring schematic to locate the power wire. This wire should be connected to the brake Theater Unit (TBU) in your trailer. Connect the remaining wires following the color-coding scheme in your manual.

Mounting the Control Module

Once the wiring is secure, mount the Tow-Pro Elite's control module to your dashboard using the provided bracket. Position it where it's easily viewable and accessible while driving. Connect the supplied power and ground wires to the fusebox, and route the brake output wire through the vehicle to the trailer's connector.

Pro tip: Ensure all connections are tight and secure to avoid any electrical interference or loss of power to the brakes. A waterproof protective cover can be used for added protection, especially for off-road adventurers.

Redarc Unveils Three Revolutionary Products at Overland Expo West
Redarc Unveils Three Revolutionary Products at Overland Expo West
REDARC’s Next Generation Electric Trailer Brake Controller, the Tow-Pro Elite V3
REDARC’s Next Generation Electric Trailer Brake Controller, the Tow-Pro Elite V3
Redarc Tow-Pro Liberty Electric Trailer Brake Controller
Redarc Tow-Pro Liberty Electric Trailer Brake Controller
Field Tested: RedArc Manager30
Field Tested: RedArc Manager30
the interior of a vehicle with an electronic device
the interior of a vehicle with an electronic device
Getting an Electric Brake Controller; everything you need to know
Getting an Electric Brake Controller; everything you need to know

Setting Up the Trailer

Once your vehicle is prepared, it's time to set up the trailer-side components. This involves installing the TBU and testing the brakes.

The TBU is the brain of the trailer's electric brake system. It sends power to the individual brake units on each wheel, proportionally and instantaneously applying the brakes when needed. It's typically mounted near the trailer's light socket.

Installing the Trailer Brake Wire Harness

Connect the trailer brake wire harness to the existing trailer light connector. Typically, this is a 7-pin or 12-pin connector. The brake wire (usually brown or yellow) should be connected to the TBU. The other wires can be connected as follows: ground (white or green), left turn (yellow), right turn (blue), tail lights (red), and running/brake lights (brown or yellow).

Accelerate TowPro Electronic Break Controller Kit - 250 Series Prado
Accelerate TowPro Electronic Break Controller Kit - 250 Series Prado
a black truck with its hood open on the side of the road at night time
a black truck with its hood open on the side of the road at night time

Double-check your manual if your trailer has differing color codes. Always ensure the polarity is correct to prevent damaging electrical components.

Wiring the Trailer Brakes

Run the wire from the TBU to the trailer brakes, following your trailer's structure or existing wiring. Connect each brake unit to the main wire, ensuring they're securely fast and aligned for proper brake operation. Once everything is wired up, perform a test to ensure your trailer brakes are functioning correctly.

The REDARC Tow-Pro Elite includes a self-learning feature that automatically configures itself for optimal performance. Once set up, it'll adjust to your driving style and trailer configuration, ensuring you're always in safe hands.

With your REDARC Tow-Pro Elite set up correctly, you're now ready to hit the road with confidence. Safe towing relies on well-maintained equipment and proper setup. Always follow the manufacturer's guidelines, and don't hesitate to reach out to REDARC's customer support team if you need further assistance.

💬 Comments ↗ Share ★ Save
AD