Rugged Ridge Dual Battery Tray Installation
Tackling harsh terrains and challenging conditions in your vehicle? A rugged dual battery setup is not just recommended, but often necessary. One popular choice for achieving this is the Rugged Ridge Dual Battery Tray. But, before you hit the trail, you need to know how to install it right. This guide will walk you through the process, ensuring your dual battery setup is secure and reliable.
The Rugged Ridge Dual Battery Tray is designed to fit various vehicle makes and models. It's crucial to check compatibility before purchasing. Once you've confirmed it fits your ride, you're ready to install. Here's how.
Preparing Your Vehicle and Tools
Before you start, ensure your vehicle is parked on a level surface and the engine is off. Gather your tools: a wrench, socket set, drill, and a ratchet. You'll also need the Rugged Ridge Dual Battery Tray and two batteries, of course.
Next, access your vehicle's battery bay. Some vehicles may require removing a plastic cover or accessing the bay through the engine compartment.
Removing the Old Battery Tray (if present)
If your vehicle already has a battery tray, you'll need to remove it to make way for the new one. Use your wrench or socket set to loosen and remove the bolts securing the tray. Keep track of these bolts, as you'll need them later.
Once the bolts are removed, carefully slide the tray out. If it's stuck, you may need to use some penetrating oil to help loosen it. With the old tray out, you're ready for the new one.
Installing the Rugged Ridge Dual Battery Tray
Begin by positioning the Rugged Ridge Dual Battery Tray in place. It's designed to fit snugly, so you shouldn't need to force it. Once it's situated, start bolting it down using the provided hardware. Ensure the bolts are tightened securely, but be careful not to overtighten.
Now that the tray is secure, it's time to install the batteries. Position the first battery in the tray, securing it with the provided brackets and bolts. Repeat the process with the second battery.
Connecting the Batteries and Running Wires
With the batteries in place, it's time to connect them and run the wires. The exact process will depend on your vehicle's wiring and the batteries you're using. Generally, you'll need to connect the positive (+) terminal of one battery to the positive terminal of the other, and the same for the negatives (-).
Use appropriate cable size and ensure all connections are clean and secure. Consider using wire connectors or soldering the connections for added reliability. After connecting the batteries, route the wires through the tray and into your vehicle's engine bay.
Isolating the Batteries (optional but recommended)
An isolator allows both batteries to charge simultaneously from the alternator but prevents them from discharging into each other when the engine is off. This prevents parasitic drain and ensures both batteries stay in top condition.
Installing an isolator involves connecting it inline with your vehicle's charging system. Consult your vehicle's wiring diagram and the isolator's installation instructions for the exact process.
Testing the System
Before hitting the trail, test your dual battery setup. Start the engine and let it idle for a few minutes to allow both batteries to charge. Then, turn off the engine and check that both batteries are holding their charge.
Let your vehicle sit for an hour or two, then recheck the battery voltages. If both are maintaining their charge, your Rugged Ridge Dual Battery Tray installation is complete and ready for action!
In your adventures, always keep an eye on your batteries. If they're not performing as expected, it may be time to service or replace them. Happy exploring!