Switch JoyCon Battery Replacement: A Simple, Eco-Friendly Guide
Tired of your Nintendo Switch Joy-Cons running out of juice in the middle of a game? Replacing the battery can extend your playtime and ensure you're always ready to go. But don't worry, you don't need to be a tech expert to do this. Let's guide you through the process of switch joycon battery replacement, step by step.
First, let's understand why you might need to replace the battery in your Joy-Cons. The Joy-Cons are wireless, which means they're powered by rechargeable batteries. Over time, these batteries can lose their capacity to hold a charge, leading to shorter battery life. Replacing them can restore your Joy-Cons to their original playtime capacity.
What You Need for Switch JoyCon Battery Replacement
Before you start, make sure you have the following:
- A new battery. Get a pair of batteries, preferably with a high mAh rating for longer playtime.
- A small Phillips screwdriver. You'll need this to open the Joy-Con case.
- Rubbing alcohol and cotton swabs. These will help clean the battery contacts.
- Optional: A small, flat-blade screwdriver or a card to carefully pry open the case if needed.
Preparing Your Joy-Cons
Before you start, make sure your Joy-Cons are fully discharged and powered off. This ensures your safety and makes the process easier.
Next, remove the small rubber covers on the bottom of your Joy-Cons. These covers hide the Phillips screws that secure the case. If your Joy-Cons are newer, these screws might be captive, meaning they're held in place with a plug instead of a traditional screw head. If this is the case, you won't be able to remove them completely, so just unscrew them as far as they'll go.
Opening the Case
Using your Phillips screwdriver, carefully unscrew the four screws on the bottom of your Joy-Con. If your Joy-Con has captive screws, use your screwdriver to turn them counterclockwise until they're loose. Then, use a small, flat-blade screwdriver or a card to carefully pry the case open. Be gentle to avoid damaging the case or the internal components.
Once the case is open, you'll see the battery. It's glued in place, so you'll need to use some force to remove it. You can use the edge of a plastic tool, like a guitar pick or a small plastic wedge, to carefully pry the battery out. Be patient and apply steady pressure to avoid damaging the battery or the Joy-Con.
Switch JoyCon Battery Replacement: Installing the New Battery
With the old battery removed, it's time to install the new one. Make sure the positive and negative terminals on the new battery match the ones on the Joy-Con. Then, carefully align the battery and press it into place. The battery should snap into the Joy-Con with a satisfying click.
Before you close up the case, use the rubbing alcohol and cotton swabs to clean the battery contacts. This removes any dirt or corrosion and ensures a good connection between the battery and the Joy-Con's internal components.
closing the Case
Once the battery is in place and the contacts are clean, it's time to close up the case. If your Joy-Con has captive screws, thread them back into the holes and turn them clockwise until they're tight. If your Joy-Con has regular screws, use your Phillips screwdriver to thread them back into the holes and turn them clockwise until they're tight. Be careful not to overtighten the screws.
Finally, replace the small rubber covers on the bottom of your Joy-Con. Now you're ready to power on your Joy-Con and enjoy some extended gameplay!
Charging Your Joy-Cons
After replacing the battery, it's a good idea to charge your Joy-Cons fully. This ensures the new battery is properly calibrated and ready to give you the longest playtime possible.
To charge your Joy-Cons, simply place them in the Joy-Con grip and connect the grip to your Switch console. You can also charge them using the Joy-Con charging grip or the USB charging cable that came with your Switch. Once they're fully charged, you're ready to get back into the game!
Congratulations! You've successfully completed the switch joycon battery replacement process. Now you can look forward to many more hours of uninterrupted gaming. And remember, if you ever have any questions or need further assistance, the Nintendo support community is always there to help. Happy gaming!