▲Wirig Diagram Hot
▲ ▲ ▼

What's the Difference: XLPE vs Armoured Cable

By

When it comes to electrical cabling, there are several options to choose from, each designed for different purposes and applications. Two of the most commonly used types of electrical cables are XLPE (Cross-Linked Polyethylene) and Armoured Cable. But what's the difference between the two? Let's dive in to understand each type better and help you make an informed decision.

To begin, let's briefly understand what each type of cable is. XLPE cables, often referred to as XLP cables, are a type of polymeric-insulated cable where the insulation is cross-linked by subjecting it to heat and pressure in the presence of a cross-linking agent. Armoured cables, on the other hand, are a type of electrical cable with a metallic protective layer, usually made of steel, over the insulation to provide mechanical strength and protection against external factors.

Conductor Materials

One of the primary differences between XLPE and armoured cables lies in their conductor materials. XLPE cables typically use aluminum or copper as their conductor material, making them lighter and more flexible compared to armoured cables. This is because armouring adds significant weight to the cable.

XLPE vs PVC Wires and Cables: Key Differences, Uses & Selection Guide | Dynamic Cables Limited
XLPE vs PVC Wires and Cables: Key Differences, Uses & Selection Guide | Dynamic Cables Limited
an electrical cable labeled in different parts
an electrical cable labeled in different parts
the parts of an electrical device are labeled in this diagram, including wires and other components
the parts of an electrical device are labeled in this diagram, including wires and other components

Armoured cables, on the other hand, usually have a copper conductor due to its high durability and resistance to corrosion. However, due to the armouring, they are less flexible and heavier than their XLPE counterparts. This can make installation more challenging, especially in small, confined spaces.

Insulation

Another key difference is in the insulation. XLPE cables are insulated with polyethylene that has been cross-linked, making it highly resistant to high temperatures and chemicals. This provides excellent electrical stress relief, damage resistance, and enhancedlongevity. Furthermore, the cross linking process makes XLPE resistant to moisture absorption and permeation.

Armoured Cable
Armoured Cable
XLPE Submarine Power Cable Manufacturers Sharing Repair and Maintenance Tips
XLPE Submarine Power Cable Manufacturers Sharing Repair and Maintenance Tips
Shielded vs. Unshielded Cables: What's the Difference and How to Choose the Right One? - Just Measure it
Shielded vs. Unshielded Cables: What's the Difference and How to Choose the Right One? - Just Measure it

Armoured cables, however, use a different type of insulation. The most common is PVC (Polyvinyl Chloride) which provides good electrical insulation. But, unlike XLPE, PVC is not heat resistant and can degrade when exposed to high temperatures. Additionally, PVC is more prone to moisture permeation than XLPE.

Protection Against Physical Damage

One of the primary advantages of armoured cables is their superior protection against physical damage. The armour layer, usually made of galvanized steel, provides a robust barrier against impact, moisture, and rodents. This makes armoured cables ideal for outdoor use, underground installations, and areas with a risk of physical damage.

XLPE cables, while not as protected physically, are designed to withstand a certain level of mild bending and pulling during installation. However, they are not recommended for highly abusive environments where they might be exposed to physical damage or extreme temperatures.

MARINE & OFFSHORE CABLES
MARINE & OFFSHORE CABLES
What is XLPE cable?
What is XLPE cable?
three different types of wires are shown in this graphic above it is an image of two red and one blue cables
three different types of wires are shown in this graphic above it is an image of two red and one blue cables
the different types of electrical wires and their corresponding connections are shown in this table, which shows
the different types of electrical wires and their corresponding connections are shown in this table, which shows
Powering the future with the Shield of Reliability.
Powering the future with the Shield of Reliability.
12 AWG 4 C SOLID AC HEALTH CARE FACILITY CABLE - THHN/THWN Conductors/Aluminum Armor - Best Wire & Cable
12 AWG 4 C SOLID AC HEALTH CARE FACILITY CABLE - THHN/THWN Conductors/Aluminum Armor - Best Wire & Cable

Cost and Maintenance

The cost of XLPE and armoured cables can vary significantly due to their different compositions and properties. Generally, XLPE cables are less expensive due to their lighter weight and simpler construction. They also require less maintenance as they are resistant to many environmental factors.

Armoured cables, on the other hand, are more expensive due to the additional armour layer. However, their high protection and durability often justify the extra cost for applications where extreme conditions are expected. Periodic maintenance is also required to ensure the armour layer remains intact and protective.

Applications

XLPE cables are commonly used in power and distribution lines, both indoors and outdoors. They are also used in underwater cable systems due to their excellent resistance to both high temperatures and water. Their lightweight and flexibility make them ideal for aerial and underground installations.

LT XLPE Cable Manufacturers Helping Industries with their Products
LT XLPE Cable Manufacturers Helping Industries with their Products
Global Aircraft Wire and Cable Market Trends Shaping Aviation
Global Aircraft Wire and Cable Market Trends Shaping Aviation
Structured Cabling in Los Angeles and Data Center Performance Solutions - United Cabling
Structured Cabling in Los Angeles and Data Center Performance Solutions - United Cabling

Armoured cables are typically used in heavy-duty applications where the cables need to withstand harsh conditions. They are commonly found in industrial settings, mining operations, and outdoor installations in areas like workshops, oil drilling rigs, and shipyards. They can also be used for inducing heating in industrial processes due to their high current-carrying capacity.

In conclusion, the choice between XLPE and armoured cables depends on the specific requirements of your project. XLPE cables are a good choice for general use, offering a balance between cost, flexibility, and durability. Armoured cables, on the other hand, provide superior protection against harsh conditions and are ideal for heavy-duty applications. Always consult with a professional electrician or electrical engineer to ensure you are making the right choice for your needs.”

💬 Comments ↗ Share ★ Save
AD