▲Wirig Diagram Hot
▲ ▲ ▼

Size Guide: Equipment Grounding Conductor for 100 Amp Service

By

Ensuring safety and compliance with electrical codes is paramount when installing or upgrading a 100-amp service. One critical aspect is determining the proper size of the equipment grounding conductor (EGC). The EGC plays a vital role in maintaining continuity and ensuring the path of least resistance to safely dissipate any fault currents in your electrical system.

Before diving into the specifics, let's understand that the size of the EGC is determined by the service entrance conductor size. The National Electrical Code (NEC) provides clear guidelines on this. So, if you're planning to install a 100-amp service, you'll need to understand the NEC rules regarding EGC sizing.

NEC 2020 Guidelines for EGC Sizing

The NEC 2020 edition provides clear instructions on sizing EGCs based on the service entrance conductor size. For 100-amp services, the guidelines are as follows:

How to Size Equipment Grounding Conductor (EGC)?
How to Size Equipment Grounding Conductor (EGC)?
How to Size Grounding Electrode Conductor (GEC)?
How to Size Grounding Electrode Conductor (GEC)?
Sizing of Conductors Related to Grounding & Bonding
Sizing of Conductors Related to Grounding & Bonding

1. Conductor Size 1 AWG to 6 AWG: The EGC must be the same size as the largest ungrounded conductor or 8 AWG, whichever is larger.

2. Conductor Size 8 AWG and Smaller: The EGC must be the same size as the largest ungrounded conductor or 10 AWG, whichever is larger.

the size and length of wires are shown in this graphic above which wire sizes do you need to use?
the size and length of wires are shown in this graphic above which wire sizes do you need to use?
Table 250.102(C)(1) Sizing Grounded Conductors, Bonding Conductors, and Bonding Jumpers
Table 250.102(C)(1) Sizing Grounded Conductors, Bonding Conductors, and Bonding Jumpers
Different sizes of earthing conductors: Typical Applications
Different sizes of earthing conductors: Typical Applications

Understanding Ampacity

EGC size isn't solely based on the service rating but also on ampacity. Ampacity refers to the current-carrying capacity of a conductor, measured in amperes (A). The aim is to ensure that the EGC can handle the current safely, preventing any overheating or damage.

In the case of a 100-amp service, it's crucial to understand that the EGC's ampacity must be at least 100 A. This ensures that it can safely accommodate any fault currents that may occur.

Types of EGCs and Their Sizes

The type of EGC used can also impact its size. The most common types are copper, aluminum, or isolated perpendicular type. Copper and aluminum EGCs come in various sizes, all you need to do is ensure they meet the above ampacity and sizing guidelines.

How to Size Service-Entrance Conductors and Feeder Cables?
How to Size Service-Entrance Conductors and Feeder Cables?
10-Hole Tinned Copper Grounding Rod Kit | Reliable Electrical Grounding
10-Hole Tinned Copper Grounding Rod Kit | Reliable Electrical Grounding
Grounding Conductor Size Calculator — NEC 250
Grounding Conductor Size Calculator — NEC 250
the size and measurements for an amp speaker with different types of speakers in each section
the size and measurements for an amp speaker with different types of speakers in each section
Do I have to connect the grounding electrode at a detached garage to the grounding electrode at the main structure?
Do I have to connect the grounding electrode at a detached garage to the grounding electrode at the main structure?
21 March 2026
21 March 2026

For isolated perpendicular EGCs, the size must be at least as large as the service-entrance conductor. Typically, this type comes in sizes starting from 6 AWG, which should suffice for a 100-amp service.

Special Considerations for 100-Amp Services

While the NEC guidelines provide a solid foundation for EGC sizing, there are a few special considerations to keep in mind for 100-amp services:

Service Enclosed by a Building or Structure

If your service is enclosed by a building or structure, the EGC must be at least 8 AWG, regardless of the service-entrance conductor size. This is due to the potential fire hazard of a grounded metallic structure.

the grounding and bonding process is depicted in this graphic above it's description
the grounding and bonding process is depicted in this graphic above it's description
the diagram shows how to install an electric fence
the diagram shows how to install an electric fence
the diagram shows how to use grounding systems for underground heating and water heaters
the diagram shows how to use grounding systems for underground heating and water heaters

Multi-Wire Branch Circuits (MWBCs)

If your 100-amp service uses MWBCs, ensure that each ungrounded conductor has a dedicated equipment grounding conductor. This is because MWBCs rely on the grounded conductor for fault protection, making it crucial to have an adequately sized EGC.

When planning your 100-amp service, always consult with a licensed electrician. They can provide guidance based on your specific situation and ensure your setup is compliant with local electrical codes. Safety should always be your top priority when dealing with electrical systems.

💬 Comments ↗ Share ★ Save
AD