Why Tie Two 20 Amp Breakers Together?
If you've recently encountered a panel with two 20-amp circuit breakers tied together, you might be wondering why this is the case. After all, isn't one enough to handle the expected load? In the realm of electrical systems, there's always more than meets the eye, and this setup serves a vital purpose in enhancing safety and reliability.
Before diving into the specifics, let's quickly understand what a 20-amp breaker is. It's a device designed to prevent electrical hazards in your home or office by protecting the wiring and the circuits. These breakers 'trip' or shut off power when they detect an overload or short circuit, preventing fires and other electrical dangers. Now, why are two 20-amp breakers tied together?
Double Tapping for Increased Load Handling
One of the primary reasons is to handle increased load. All breakers have a specific amperage rating, and in this case, each 20-amp breaker can safely handle up to 20 amps of continuous load. When you wire two of them together, you essentially 'double tap' the circuit, allowing it to safely carry up to 40 amps of continuous load.
This setup is common in high-load applications like electric heaters, heavy-duty machinery, or large-scale appliances. For instance, a house with an electric range might need a tire 8 circuit (120/240V, 40-amp) to power both the range and the dryer, which can't be achieved with just one 20-amp breaker.
Safety through Redundancy
Another reason is redundancy, which adds an extra layer of safety. If one breaker is accidentally left in the 'off' position, the other can still protect the circuit. Similarly, if one breaker fails due to any reason, the other continues to offer protection, reducing the risk of electrical hazards and fires.
This redundancy also allows for scheduled maintenance. Say, you need to inspect or replace one breaker; you can turn off the corresponding breaker and continue using the other, minimizing downtime and inconvenience.
Parallel Wiring for Improved Reliability
Parallel wiring, as it's often called, also improves the reliability of your electrical system. On its own, a single 20-amp breaker has a certain ' failure rate. With two breakers, the combined failure rate is significantly lower, as they fail independently.
Think of it like having two car brakes – if one were to fail, you'd still have the other for safety. This parallel arrangement in electrical breakers offers a similar fail-safe mechanism, ensuring your electrical system remains protected and functional in most circumstances.
Legality and Code Compliance
Tying two 20-amp breakers together isn't just a clever workaround for increased load; it's also compliant with the National Electrical Code (NEC). The NEC is a standard followed in the United States for safe electrical practices, and it allows for this setup under certain conditions.
However, always consult the NEC or your local electrical codes before proceeding with such modifications. Incorrect wiring can lead to severe risks, including fire and shock hazards.
Proper Wiring and Safety Measures
When tying two breakers together, it's crucial to wire them in parallel – not series. In series, the load is shared between the two breakers, leading to less protection and increased risk of failure. Parallel wiring ensures the load is evenly distributed between both breakers.
Never connect the load terminals of both breakers directly to each other. Instead, use a bus bar or run the wire through both breakers' terminals, ensuring both have an equal share of the load.
In conclusion, having two 20-amp breakers tied together offers numerous benefits, from handling increased load to enhancing safety and reliability. However, it's essential to understand the electrical principles at play, follow NEC guidelines, and ensure proper wiring practices to reap these benefits safely.