▲Wirig Diagram Hot
▲ ▲ ▼

Why Shunts are Used in Ammeters

By

The use of a shunt in ammeter circuits is a fundamental aspect of electrical measurement, but why is it employed? The answer lies in the need for current measurement over a wide range and the limitations of a standard ammeter.

A standard ammeter has a fixed resistance, and its ability to measure current accurately is limited by its full-scale deflection (FSD). To measure higher currents, one could use an ammeter with a higher FSD, but this would make it less sensitive to smaller currents. This is where the shunt resistor comes into play.

Understanding Shunt Resistor in Ammeter Circuits

The shunt resistor, with its low resistance value, is placed in series with the circuit whose current is to be measured. A small voltage drop across the shunt is proportional to the current flowing through it. This voltage, measured using a sensitive voltmeter, can be used to find the current.

What is Ammeter Shunt? - Definition & Shunt Resistance Calculation - Circuit Globe
What is Ammeter Shunt? - Definition & Shunt Resistance Calculation - Circuit Globe
Shunt Resistor Calculator for Ammeters
Shunt Resistor Calculator for Ammeters
Ammeter and Voltmeter Placement | Physics Circuit Measurement Notes
Ammeter and Voltmeter Placement | Physics Circuit Measurement Notes

The beauty of this arrangement is that the shunt allows for the measurement of a wide range of currents using the same basic circuit setup. By changing the resistance of the shunt, one can adjust the range of current measurement without having to resort to multiple ammeters.

Parallel and Series Connection of Ammeter

In some circuits, depending on the current to be measured, the ammeter may be connected in parallel or series.

Series & Shunt Type Ohmmeter | Working Principle
Series & Shunt Type Ohmmeter | Working Principle
The 60-66 GMC Guy
The 60-66 GMC Guy
the wiring diagram for an electric meter with three phase current measurements and two timers
the wiring diagram for an electric meter with three phase current measurements and two timers

For higher currents, the ammeter is connected in parallel in a shunt arrangement. Conversely, for smaller currents, it might be connected in series to avoid overloading the ammeter.

Shunt Resistor Calculation and Selection

To calculate the resistance of the shunt, one simply uses Ohm's Law: R = V / I, where V is the voltage drop across the shunt (typically a few millivolts) and I is the maximum current to be measured.

Selection of the shunt also depends on the operating conditions, such as the allowable power dissipation. The power dissipation should be less than the dissipation that creates a voltage drop across the shunt that affects the circuit. Generally, dissipations in the range of 1-2 watts are common.

two different types of thermometers on a white background and one with black trim
two different types of thermometers on a white background and one with black trim
Shunt use - Analog ampermeter - DC amper nasıl ölçülür
Shunt use - Analog ampermeter - DC amper nasıl ölçülür
Shunt motor
Shunt motor
A Guide to Shunt Resistors and Ammeter Shunts
A Guide to Shunt Resistors and Ammeter Shunts
What is a Shunt?
What is a Shunt?
What is Ammeter, Construction, Working, Types & Applications - The Engineering Knowledge
What is Ammeter, Construction, Working, Types & Applications - The Engineering Knowledge

Advantages and Limitations of Using a Shunt in Ammeters

The shunt offers several advantages, such as wide range of current measurement, accurate measurement, and stable operation. However, it has some limitations as well.

Large current values can cause the shunt to heat up, leading to errors in measurement due to the change in resistance with temperature. Linearity can also be an issue, especially with materials like carbon whose resistance varies with temperature and Applied voltage.

Shunt Calibration and Maintenance

Shunts need to be calibrated periodically to ensure accuracy. This can be done using a Weston cell or a standard resistor. Regular checks for any signs of overheating or damage to the leads can help maintain the accuracy of the device.

Bulb Connected in a Strange Way? Will it Glow? What is The Current?
Bulb Connected in a Strange Way? Will it Glow? What is The Current?
a piece of paper that has some writing on it
a piece of paper that has some writing on it
Ammeter - A Complete Guide!
Ammeter - A Complete Guide!

Use of a suitable insulation material and proper termination of the leads can help prevent incorrect readings and damage to the equipment.

In conclusion, the use of a shunt in an ammeter circuit offers flexibility, accuracy, and stability, making it a mainstay in the world of electrical measurement. Understanding and proper usage of the shunt can help make the most of its advantages and mitigate any potential issues. whether you're in the lab, on a manufacturing floor, or troubleshooting a circuit, a well-placed shunt resistor can be a valuable tool.

💬 Comments ↗ Share ★ Save
AD