▲Wirig Diagram Hot
▲ ▲ ▼

Wire MM2 to Amps: Easy Conversion Guide

By

Ever wondered how to convert wire gauge from square millimeters (mm²) to amps (current capacity)? As an electrician, engineer, or DIY enthusiast, knowing this relationship is crucial for ensuring safety and efficiency in your electrical systems. Let's dive into this essential calculation, discussing wire sizes, ampacity, and how to perform the conversions accurately.

First, let's understand the basics. In electrical engineering, the cross-sectional area of a wire is measured in millimeters squared (mm²). This dimension directly correlates to the wire's current-carrying capacity, typically expressed in amperes (A) or amps for short. The larger the wire's cross-section, the more current it can safely conduct without overheating.

Understanding Wire Gauge and Ampacity

Ampacity refers to the maximum current a conductor can carry continuously under specified conditions without exceeding its temperature rating. It's the limiting factor in determining how much current a specific wire size can safely handle. Understanding wire gauge and ampacity is the first step in converting mm² to amps.

How many Amps Can 16mm2 Cable Take? (Explained With Example)
How many Amps Can 16mm2 Cable Take? (Explained With Example)
How to Wire Speakers to an Amp
How to Wire Speakers to an Amp
AWG para mm²
AWG para mm²

Wire gauges are standardized, with larger numbers indicating smaller diameters. The American Wire Gauge (AWG) system is commonly used in the USA, while the metric system uses millimeters squared (mm²) in many other countries. To convert between these systems, or to calculate ampacity, we'll need to understand the relationship between wire size, cross-sectional area, and current-carrying capacity.

Wire Size to Cross-Sectional Area (mm²)

For solid conductors, the conversion from AWG to mm² is not a straightforward mathematical formula due to variations in wire Manufacturers' standards. However, you can use tables or online calculators to look up the approximate mm² value for a given AWG size. For stranded (multicore) conductors, the calculation is more complex, as you need to account for the voids between the individual strands.

MM2 to AWG - Wire Size Conversion Chart, Table, & Calculator [PDF]
MM2 to AWG - Wire Size Conversion Chart, Table, & Calculator [PDF]
the table shows how many different types of electrical equipment are available for each type of device
the table shows how many different types of electrical equipment are available for each type of device
an electrical calculator with the text how to calculate cable size mm2 for 3 phase
an electrical calculator with the text how to calculate cable size mm2 for 3 phase

For metric-sized conductors, the cross-sectional area is already given in mm². You can simply use these values for your calculations without conversion. Just remember that the larger the mm² value, the bigger the wire diameter and the higher its current-carrying capacity.

Cross-Sectional Area (mm²) to Current-Carrying Capacity (Amps)

Once you have the wire's cross-sectional area in mm², you can calculate its current-carrying capacity in amps using the following steps:

  1. Look up the applicable ampacity table or chart for the specific conductor type (solid, stranded), insulation type, and installation conditions (free air, in conduit, etc.). These tables provide ampacity values based on non-repetitive (short-term) and continuous (long-term) loading.
  2. For solid conductors, use the ampacity table for the respective AWG size or mm² value. For stranded conductors, use the appropriate table and account for the reduction in effective cross-sectional area (which takes into account the voids between strands).
  3. Review the table's footnotes to understand any adjustments for ambient temperature, voltage drop, or other factors that might affect the wire's ampacity.
  4. Select the appropriate ampacity value based on your application's requirements (continuous, non-repetitive, or adjusted for other conditions).

Here's an example of a simplified ampacity table for stranded THHN/THWN conductors (three current ratings for 60°C, 75°C, and 90°C insulation temperatures):

the different types of electrical wires are labeled in this diagram, which is what they look like
the different types of electrical wires are labeled in this diagram, which is what they look like
a paper with instructions to wire ampacty chart on it
a paper with instructions to wire ampacty chart on it
1 Gauge Wire Amps (Explained)
1 Gauge Wire Amps (Explained)
Where to Connect Remote Wire for Amp (5-Ways)
Where to Connect Remote Wire for Amp (5-Ways)
1,5 vs 2,5 mm2 Wire in series Load test
1,5 vs 2,5 mm2 Wire in series Load test
Electrical Symbols, Math Quotes, Electrical Transformers, Electrical Circuit Diagram, Study Smarter, Circuit Diagram, Electrical Wiring, Circuit, Electronics
Electrical Symbols, Math Quotes, Electrical Transformers, Electrical Circuit Diagram, Study Smarter, Circuit Diagram, Electrical Wiring, Circuit, Electronics
Conductor Size (mm²) 60°C Ampacity (Amps) 75°C Ampacity (Amps) 90°C Ampacity (Amps)
2.5 11 12 16
4 13 15 19

Practical Examples: Converting mm² to Amps

Now that you understand the concept behind converting mm² to amps, let's walk through a couple of practical examples.

Example 1: AWG to mm² to Amps

You're planning an electrical project in Canada and need to know the maximum current a specific AWG-sized wire can carry. Suppose you're using a 10 AWG solid copper conductor at 60°C with installation in free air:

  1. First, look up the approximate mm² value for a 10 AWG wire. Using an online calculator, you find that it's around 16 mm².
  2. Next, consult an applicable ampacity table for 60°C, stranded conductors (even though it's a solid conductor, using the stranded table is more accurate due to variations in manufacturing). You find that 16 mm² has an ampacity of 24 Amps.
  3. Therefore, a 10 AWG, 16 mm² solid copper conductor can safely carry a continuous current of up to 24 Amps in free air at 60°C.

Example 2: mm² to Amps for a specific current

You want to run a 20-ampere circuit in a location where the maximum continuous current rating for the conductor is 15 amps at 90°C. What size conductor (in mm²) should you use?

What is the Right Wire Size for 100-Amp Service Panel?
What is the Right Wire Size for 100-Amp Service Panel?
  1. Look up the ampacity table for 90°C, stranded conductors. Ideally, you'd want a wire with a current rating greater than or equal to 20 Amps but no larger than necessary to minimize costs and prevent overkill.
  2. From the table, find a wire size with an ampacity of 20 Amps or higher at 90°C. Suppose you find that a 10 mm² conductor has an ampacity of 26 Amps at 90°C.
  3. Therefore, a 10 mm² stranded conductor should be suitable for running a 20-ampere circuit safely and efficiently under the specified conditions.

Calculating the current-carrying capacity of wires is an essential aspect of electrical engineering and DIY projects. With practice, using ampacity tables and understanding the underlying principles, you'll become proficient in converting mm² to amps, ensuring the safety and reliability of your electrical systems.

💬 Comments ↗ Share ★ Save
AD