Reset Navien System: Step-by-Step Guide
Let's say you've been enjoying the comfort and efficiency of your Navien condensing tankless water heater, but you've found that it's not performing as it should. Don't worry; this happens sometimes, and you can likely fix it with a reset. So, how do you reset your Navien system? Let's go through the process step by step.
The first thing you need to understand is that Navien systems have a unique feature - the 'error lockout'. This feature temporarily shuts down the system when it detects an issue like high temperature or FI (flame) error. Resetting the system usually resolves these temporary issues. Now, let's break down the reset process further.
Resetting the Navien System
Resetting your Navien system involves a few simple steps. Make sure to have your owner's manual handy, as the exact process might vary slightly depending on your specific model.
Before you proceed, ensure that your system is powered off. Switch off the breaker that controls your water heater at your home's electrical panel to ensure the system is completely powered down.
Clearing the Error
After turning off the power, locate the error code display on your Navien system. It's usually a small screen near the control panel where you can find an error code if one is present.
To clear the error, press and hold the 'ON/OFF' button for about 5 seconds, then release it. The error code, if any, should disappear from the display, indicating that the system has been reset. If the error persists, move on to the next steps.
Checking the Inner Filter
Sometimes, the error might be due to a clogged inner filter. The inner filter is located on the side of the water heater, and checking it shouldn't take long.
First, find the button marked 'INNER FILTER' on the control panel. Press and hold it for around 5 seconds. This should open the inner filter chamber. Use a flathead screwdriver to gently remove any debris or particles that might have accumulated in the filter. Once you've cleaned the filter, press the 'INNER FILTER' button again to close the chamber.
Testing the System
After clearing the error and checking the inner filter, it's time to test your Navien system to ensure it's working correctly.
Turn the breaker back on at your electrical panel to restore power to your water heater. Then, press the 'ON/OFF' button on the control panel to start the system. If everything is working correctly, the system should come back online without any errors.
Monitoring the System
Once your Navien system is back online, monitor it closely for a few days to ensure it's working correctly. Check for any signs of leaks, unusual noises, or errors appearing on the display.
Remember, preventing issues is always better than fixing them. Regular maintenance, like checking and cleaning the inner filter every 6-12 months, can go a long way in keeping your Navien system running smoothly and efficiently.
In the event that your Navien system still isn't working correctly after following these steps, it might be a good idea to contact a professional for help. They can diagnose and fix any complex issues, ensuring your water heater is working safely and efficiently.